2015-10-06T00:16:19Z PunBB https://www.soliforum.com/topic/12479/da-vinci-aio-error-14/ I have been getting error #14 (The temperature of extruder reach to warning range limit) which simply mens the extruder won't heat this happened after i got a little rough with the extruder trying to unjam it. So i assumed it could only be the Thermistor or Ceramic cartridge heater (Which i thought may have shorted in itself because the wire covering was rubbed through in two little spots of the wires. So i replaced the thermistor and the Ceramic cartridge heater and it still doesn't heat. I'm new to 3d printing but i know that the thermistor heats through its resistance in ohms so i was testing with a voltage meter and it causes resistance in the head and turns on the extruder fan but the extruder still isn't heating so if i were to guess somehow it has a bad ground or for some reason the thermistor isn't working correctly so i am at a stand still. So any help or info you may have is very appreciated.

]]> https://www.soliforum.com/user/11826/ 2015-10-06T00:16:19Z https://www.soliforum.com/post/107047/#p107047