SoliForum - 3D Printing Community — Cold End

Re: Cold End

2015-09-25T20:00:03Z

i bought a mini blow torch at the auto parts store that works great, i had a big jam up that acetone wouldnt touch, torch worked great.

Re: Cold End

2015-09-25T14:21:41Z

I use an allen wrench to clear nozzle throats. Pla gets lose enough in acetone to push it out.

Re: Cold End

2015-09-25T10:25:40Z

I bought a small chefs blowtorch specifically for clearing throats/nozzles. After burning all the filament off I use a inter dental brush dipped in isopropanol to clear any sooty residue.

Re: Cold End

2015-09-24T23:34:12Z

Yeah it's ABS...

Perfect, thanks.

Re: Cold End

2015-09-24T23:18:55Z

You don't want to breath it but if you put it in a mason jar and then put the lid on it you will be fine.

Note acetone will only work if its abs.

Re: Cold End

2015-09-24T23:02:51Z

I don't have a torch ... BBQ?

Or i'll grab some acetone. Is that stuff okay to breath in? Obviously I'm not going to try to breath it, but should I take any precautions?

Thanks for the help guys!!

Re: Cold End

2015-09-24T06:06:19Z

I've managed to clear a bad blockage in the past just using a drill.
Heating the extruder first might help if it's really bad.

Re: Cold End

2015-09-24T04:30:45Z

A torch will work on abs as well and is a lot faster

Re: Cold End

2015-09-23T23:55:11Z

What material have you been printing? If it was ABS just soak it in Acetone for about 8 hours and it will dissolve most of the material.

If you have been printing PLA then nothing safe for your well being will dissolve it. You can use a torch and burn it though.

As for modding many have changed to the E3D V6 and there are several post with the links for the carriage mods.

Cold End

2015-09-23T23:52:27Z

Does anyone know where to get (or how to clear) the cold end of an XYZ extruder...

I don't have access to a good vice or drill press, it's all clogged up with plastic. I contacted the customer service and they told me to buy a whole new extruder. Out of pure principle that's not happening.

What about bathing it in acetone and then try to drill it out (carefully)

On a side note... has anyone tried hacking on a J-head? I've heard good things about those.