SoliForum - 3D Printing Community — I've got all my Blocked restter carts working again. Duo 2.0A

Re: I've got all my Blocked restter carts working again. Duo 2.0A

2016-01-28T05:49:39Z

delete

Re: I've got all my Blocked restter carts working again. Duo 2.0A

2015-09-29T20:01:12Z

iceman72 wrote:

Anyone know if you can block out going of xyzware on OSX?

I don't sorry. Google would help. But don't use xyzware till you've blocked it or you will be back to square one.

Re: I've got all my Blocked restter carts working again. Duo 2.0A

2015-09-29T14:24:06Z

Anyone know if you can block out going of xyzware on OSX?

Re: I've got all my Blocked restter carts working again. Duo 2.0A

2015-09-27T09:56:06Z

wilson.james65 wrote:

Hi do you have a da vinci2.0A duo blue printer
And where is th sd card how do I get to it
Can you give me as much info as posable I am disabled do to a open heart op and memory is not what it was It takes a bit longer to take thing in
Manny thanks james

Make sure you've unplugged the printer.
Take off the back panel. Two screws. you will see the sd card middle right.

Back it up just in case and then delete these files only

ad_check_0002
last_temperature.text
Machine_Life_date

Put it back in and test. Make sure you have the xyzware.exe blocked by your firewall.
Mine is the Da vinci 2.0A with blue sides.

Re: I've got all my Blocked restter carts working again. Duo 2.0A

2015-09-26T18:30:32Z

Hi do you have a da vinci2.0A duo blue printer
And where is th sd card how do I get to it
Can you give me as much info as posable I am disabled do to a open heart op and memory is not what it was It takes a bit longer to take thing in
Manny thanks james

Re: I've got all my Blocked restter carts working again. Duo 2.0A

2015-09-20T12:50:54Z

chrismetallica1 wrote:

Hmm cheers for the info. I'm going to check all my settings then again

Post back if it worked for you. I've uninstalled xyzware and it's folders.
I'm just using the xyz driver from windows update

Re: I've got all my Blocked restter carts working again. Duo 2.0A

2015-09-20T12:41:57Z

Hmm cheers for the info. I'm going to check all my settings then again

Re: I've got all my Blocked restter carts working again. Duo 2.0A

2015-09-20T12:39:36Z

chrismetallica1 wrote:

That's great but if you are still using XYZ ware you still need to go into the firewall settings on your PC and block the inbound and outbound connections on the XYZ software. With the latest XYZ ware they log the cartridges remotely and can shut them down again. Blocking the connection stop this

I had xyzware blocked by comodo firewall. But it still happened.
I'm using simplify3D now

Re: I've got all my Blocked restter carts working again. Duo 2.0A

2015-09-20T12:11:03Z

That's great but if you are still using XYZ ware you still need to go into the firewall settings on your PC and block the inbound and outbound connections on the XYZ software. With the latest XYZ ware they log the cartridges remotely and can shut them down again. Blocking the connection stop this

I've got all my Blocked restter carts working again. Duo 2.0A

2015-09-20T10:37:21Z

I use the XYZPro but for some reason or other the carts was not recognized any more
even after using the XYZPro again.

So I took out the SD Card from the mother board and backed it up.
I then deleted these files

ad_check_0002
last_temperature.text
Machine_Life_date

All that was left on my sd card was the offline print gcode and some samples.
Put it back in to the printer started it up and put a un-recognized cart in. It worked!

Now all my un-recognized carts are working again... Hope this helps someone.