<![CDATA[SoliForum - 3D Printing Community — Filastruder + Laser Cut Enclosure Assembly Problems]]>2015-09-02T21:39:43ZPunBBhttps://www.soliforum.com/topic/12215/filastruder-laser-cut-enclosure-assembly-problems/<![CDATA[Re: Filastruder + Laser Cut Enclosure Assembly Problems]]>I'll go to the hardware store and get a deep socket - didn't think of that, thanks! I need to get some wire crimps and heat shrink tubing anyway. No worries about refunding. Would be too complicated the way money moves around here.
Thanks!
]]>https://www.soliforum.com/user/8108/2015-09-02T21:39:43Zhttps://www.soliforum.com/post/104701/#p104701<![CDATA[Re: Filastruder + Laser Cut Enclosure Assembly Problems]]>You've explained it well, the larger motor (which is included as a free upgrade) interferes with the PID controller.
Solutions:
- Move the PID controller out, and use the provided spacers to move the motor forward. - Use a deep hex socket, they're about $2 at the local hardware store. I'm happy to refund the cost.
]]>https://www.soliforum.com/user/221/2015-09-02T21:16:30Zhttps://www.soliforum.com/post/104696/#p104696<![CDATA[Filastruder + Laser Cut Enclosure Assembly Problems]]>I'm building the v1.6 kit (SN 1844) and have figured out how to put everything together using pictures from the forum (I couldn't find a nice walkthrough for using the enclosure kit). I'm ready to start running wires but currently, the motor cannot possibly engage the auger bit. See photos below. I tried using some of the wood spacer rings behind the motor, but this new motor looks much larger than previous and physically collides with the temperature controller.
