2015-09-04T22:49:32Z PunBB https://www.soliforum.com/topic/12185/stk500v2getsync-issue/ Thanks Tito  I tried the reset button several times...  no help..  upon further inspection of the board I found a part (with 3 legs) right next to the power input plug it had a blister(?) showing...  I replaced the board and all is good till I loaded a file.. and tried to print it..... I start the print and the printer tries to drive the hot end off the hotbed... in the y direction... any idea what might cause that?

]]> https://www.soliforum.com/user/11637/ 2015-09-04T22:49:32Z https://www.soliforum.com/post/104829/#p104829 stk500 is the protocol used to program the Arduino controller. On most boards it works 100% software but on some you may need to hit the reset button at the right time (when your computer is waiting)

]]> https://www.soliforum.com/user/11936/ 2015-08-31T07:13:56Z https://www.soliforum.com/post/104538/#p104538 I get this error "stk500v2(): timeout communication with programmer", This is happening while I'm trying to up load the Marlin_delta2 file to my printer for the first time... The computer give a tone indicating it sees the board. I get a Green flashing LED on the board, and the red LEDs at the end stops....

]]> https://www.soliforum.com/user/11637/ 2015-08-30T12:18:45Z https://www.soliforum.com/post/104486/#p104486