SoliForum - 3D Printing Community — e3d v6

Re: e3d v6

2015-08-30T00:39:02Z

Here's the phone case... not bad! That stuff stick to the bed like crazy! I think it's time to try the Ninjaflex...

Re: e3d v6

2015-08-29T22:33:46Z

I like the tpu. it needs a slow print but it is a good plastic for something that needs to bend

Re: e3d v6

2015-08-29T19:11:02Z

Just tried printing with SainSmart Flexible TPU 3D Printers Filament, and for a first try, I'm really happy! ( just printed the XYZ keychain) Still some tuning to do but it frikkin printed! Trying a phone case for my S5 right now... I set the cartridge resetter at 235/60 and speed at 20mm/s...

Re: e3d v6

2015-08-27T17:41:05Z

Also, if you are using stock firmware have a look at the eeprom resetter mod I did. I wired mine to a touchscreen directly to the eeprom :-) Works very well.

http://www.soliforum.com/post/103655/#p103655

Steve

Re: e3d v6

2015-08-27T17:35:25Z

I went a different route and used a MK8 extruder as I had an unused one already. Quite a simple mod :-) I've already posted details of it here - http://www.soliforum.com/post/103113/#p103113

Re: e3d v6

2015-08-27T13:35:25Z

Thank you for your advice. Just got the original e3d. Planning to install it this weekend.

Re: e3d v6

2015-08-25T23:36:40Z

ulla wrote:

I'm too planning to make the E3D upgrade to my 1.0 A. Did you buy the original e3d or some china clone?

Spend the extra cash on the real thing. You will hate yourself if you dont. Chinese clones will only give you leaks and clogs assuming they even work.

Re: e3d v6

2015-08-25T23:02:40Z

I bought the real thing... bought it from MatterHackers.

Re: e3d v6

2015-08-25T15:05:32Z

I'm too planning to make the E3D upgrade to my 1.0 A. Did you buy the original e3d or some china clone?

e3d v6

2015-08-25T01:19:30Z

Just did the mod following brit Steve youtube videos.. so far so good. I'm running stock firmware 1.0.1 on a 1.0A. I'm using simplify3D 3.0 and I'm printing ABS, PLA, HIPS ant PETG without issue. The best thing is I only use the resetter to set temps, that's it since you don't go thru the filament counter anymore... you think I really need to go repetier or I'm fine with simplify 3D, most of my print are tools... I think I will order a spool of ninjaflex just to see.... any advice are more than welcome...