<![CDATA[SoliForum - 3D Printing Community — Using Slic3r with the Da Vinci 2.0?]]> 2015-08-15T20:46:27Z PunBB https://www.soliforum.com/topic/12055/using-slic3r-with-the-da-vinci-20/ <![CDATA[Re: Using Slic3r with the Da Vinci 2.0?]]> I have the same question. I've almost managed to change the settings from 1.0 to 2.0, but failed miserably in the end. The final  .3w file converted with notepad++ was imported into XYZware correctly and the soft recognised 2.0 printer. Unfortunately, I've received message, that 0,00m of filament will be used, DaVinci made some pre-build moves and then it freezed.

I desperately need to use another slicing soft, because XYZware is raping my geometry without a lubricant. sad


EDIT
https://modelrepair.azurewebsites.net/index.php
This service has fixed all my problems with XYZ slicer. Maybe you should try it - it's possible you won't need Slic3r anymore.

]]> https://www.soliforum.com/user/11798/ 2015-08-15T20:46:27Z https://www.soliforum.com/post/103636/#p103636 <![CDATA[Using Slic3r with the Da Vinci 2.0?]]> What does it takesto use Slic3r with the 2.0?

What has to be changed from the settings for the Da Vinci 1.0, (i.e. start/end gcode, bedsize obviously, speeds, temp, etc)?
Is it still the same process for printing, do I need to modify any firmware (model>Slic3r>Notepad++>XYZware>printer)?

If you could let me know before I start experimenting that would be great.

]]> https://www.soliforum.com/user/11380/ 2015-08-13T15:13:32Z https://www.soliforum.com/post/103495/#p103495