<![CDATA[SoliForum - 3D Printing Community — Printed Surface quality]]> 2015-08-13T18:24:56Z PunBB https://www.soliforum.com/topic/12049/printed-surface-quality/ <![CDATA[Re: Printed Surface quality]]> The first question is what size nozzle do you have?  I will assume .4 and if so....
Then in your slice profile try these numbers.
http://i.imgur.com/4SwMdGp.png
I am also making the assumption that you have gone through the proper calibration process for extrusion stepper and flow rate as explained here.  http://www.soliwiki.com/#Calibrations

]]> https://www.soliforum.com/user/2291/ 2015-08-13T18:24:56Z https://www.soliforum.com/post/103508/#p103508 <![CDATA[Re: Printed Surface quality]]> I have 1.75mm ABS. Could work with .3? Should I change the nozzle diamater on gcode for the whole printing?

]]> https://www.soliforum.com/user/11777/ 2015-08-13T18:11:36Z https://www.soliforum.com/post/103504/#p103504 <![CDATA[Re: Printed Surface quality]]> Decreasing the extrusion width for the top layer will help.  You can go close to half of normal but I have found (with a .4 nozzle) that the nicest results are at .3 to .36 depending on the filament.

]]> https://www.soliforum.com/user/2291/ 2015-08-13T14:35:14Z https://www.soliforum.com/post/103488/#p103488 <![CDATA[Printed Surface quality]]> Hi guys,

I have a flashforge creator pro and I'm having a hard time trying to have a smoth surface on a small print. I tried to increase the temperature as much as I could and improved a little. Is there something else I can do to have a smooth surface?

Thanks in advancehttp://soliforum.com/i/?GOdSJo7.jpg

]]> https://www.soliforum.com/user/11777/ 2015-08-13T12:15:35Z https://www.soliforum.com/post/103486/#p103486