anyone know where to find this part
I saw where someone was making it but never saw a link for it
found it on thingiverse
]]>https://www.facebook.com/media/set/?set … 5de928a133
complete modification airwolf with 2 titan aero and 2 volcanos !
Amazing work, but are there stl files to download?
Also it looks like the firmware link is no longer available, does anyone have it? I don't know what kind of community is left for this printer, but I've recently gotten my hands on a barely used one and really want to get rid of the stock hotend cause it's complete garbage.
]]>Hello are you still available if I try and upgrade my airwolf to E3D V6 + Volcano dual hotends
]]>I finally solved the thermocouple problem. On issue I had, was figuring out which way to hook it up. The thermocouples in the description look nothing like the one in any of the images, so eventually, I hooked it up to an Arduino. Lo and behold, I had the wires switched. Then, it took me a moment to figure out pin assignments. I can't make heads or tails of those circuit diagrams and how they relate to pin numbering in Marlin.
Thermocouples work. All of the motors work. Heaters work, although I need to find different software to control extruder 2. MatterControl still assumes I have only one heater. It heats really fast though. Holy cow!
There seems to be an issue with the controller thinking it is at home when it turn on. The head won't move past where it is when it starts. I don't think it's an endstop issue, but this is next on my list of bugs to solve.
Most importantly though, I still can't get VIKI to function. As far as I can tell, its all hooked up correctly. Without VIKI, the printer is pretty worthless. I need to print from the SD card.
]]>anyone know where to find this part
I saw where someone was making it but never saw a link for it
As far as I know, the .stl / link was never posted. If mine is down long enough in the near future, perhaps I can model it up for everyone.
]]>anyone know where to find this part
I saw where someone was making it but never saw a link for it
found it on thingiverse
]]>
I have put this off for almost 2 years now. the second hotend setup they sent me (just before my warranty was up) finally gave completely up so I printed my Chimera mount I designed for the hd2x (no spacers or other parts needed) full 1 part print and your good to go.
Anyway,
i'm using 1.8.5 arduino
I did do the find and replace for the fpos_t to fatpos_t
now I get a ton of errors on the LiquidTWI2 file and it errors on on compiling
attached is a sample of some of the errorsmy Vicki is just a Vicki LCD or that is what it says
Any help would be appreciated
need to see the code to be sure, but try replace for the fatpos_t back to fpos_t and see if that will fix the problem. It is possible some other names contain fpos_t are replaced by mistake. Also you may want to replace it across the whole project instead of the current file.
]]>my Vicki is just a Vicki LCD or that is what it says
Any help would be appreciated
Long term, I will not be happy with this. I’ll have to try and configure Marlin from scratch. Assuming Airwolf didn’t modify the board itself, this should be doable.
]]>