<![CDATA[SoliForum - 3D Printing Community — CTC 3D, thermocouple issue]]> 2015-09-01T07:57:21Z PunBB https://www.soliforum.com/topic/11948/ctc-3d-thermocouple-issue/ <![CDATA[Re: CTC 3D, thermocouple issue]]> Mine is now fixed. It's basically a new board if this happens.

]]> https://www.soliforum.com/user/11853/ 2015-09-01T07:57:21Z https://www.soliforum.com/post/104598/#p104598 <![CDATA[Re: CTC 3D, thermocouple issue]]> Hmm, this is the exact issue I'm having with my CTC, but on the right side. I'm gonna tag this and keep an eye on it.

]]> https://www.soliforum.com/user/11853/ 2015-08-22T10:19:25Z https://www.soliforum.com/post/104024/#p104024 <![CDATA[Re: CTC 3D, thermocouple issue]]> Anyone have any idea?

]]> https://www.soliforum.com/user/9988/ 2015-08-03T13:36:46Z https://www.soliforum.com/post/102764/#p102764 <![CDATA[CTC 3D, thermocouple issue]]> Hello All,

I was printing fine, then i went to start another print and the left extruder was at around 170C, suddenly it went to 29C and turned off the fan. I turned off the printer and turned it on and nothing. I got another thermocouple that i know was working because i tested on the right extruder and it worked fine, but when i connect it to the left the temperature stays at 29C. Also, even if i disconnect the thermocouple it still says 29C, unlike the right one it will go N/A and call out a temp failure. Does anyone know what happened? Also, does anyone know where i could get schematics for the mightyboard? i want to see if i burned something out.
I have heard that the mightyboard suffers from thermocouple failures and it will break the board if you dont have sailfish installed. I didnt have it installed so that might be a reason too.

Thanks.

]]> https://www.soliforum.com/user/9988/ 2015-08-02T18:26:37Z https://www.soliforum.com/post/102723/#p102723