SoliForum - 3D Printing Community — E3D J head hot end

Re: E3D J head hot end

2015-08-19T11:29:46Z

Thanks Azerate.

Re: E3D J head hot end

2015-08-15T14:31:19Z

You want to go with the MK6 that wardr revised. If you search Solidoodle E3D v6 in Thingiverse, you will find multiple designs.
The profiles are identical between the Lite6 and the v6

Re: E3D J head hot end

2015-08-15T14:04:33Z

Will the MK5 work with v6? I didnt go with a lite...I just bought the full V6.

Re: E3D J head hot end

2015-08-15T02:11:59Z

An extended Z tab would help. Especially if you ever choose to add on a Volcano.
Also, stock up on 3mm screws and nuts. I made far too many runs to Home Depot when I first upgraded to the Lawsy carriages.

The Z tab I meantioned shouldn't be mandatory for the v6. If needed, you *could* just flip the screw. But only crazy people do that

Re: E3D J head hot end

2015-08-14T23:45:39Z

MK5 if you need one.

Re: E3D J head hot end

2015-08-14T20:35:30Z

Got my V6 in today. Got the LM88Us in last week. I printed lawsy's x and y carriage replacements, what else to I need to print before I rip this thing down?

Re: E3D J head hot end

2015-07-31T18:26:24Z

I hadnt noticed the SD card slot on the board before...interesting

Re: E3D J head hot end

2015-07-31T18:20:34Z

You'll want to read through the WIKI Sections some is out of date yet still applicable.
http://www.soliwiki.com/Updating_Solidoodle_Firmware Pay close attention to the Printerboard section. The firmware is in there but just in case https://github.com/ozadr1an/Solidoodle- … in_v1_beta
Reading through the e3d section will at least help you to understand most of what is involved. http://www.soliwiki.com/E3D_extruder
You'll want to follow the complete V6 hot end assembly instructions http://wiki.e3d-online.com/wiki/Main_Page
Hope that helps

Re: E3D J head hot end

2015-07-31T17:55:12Z

That's a printrboard.

Also, lol to "risk of electric shock". The highest voltage on that board is 12 volts.

Re: E3D J head hot end

2015-07-31T17:01:25Z

Here is my board

Re: E3D J head hot end

2015-07-31T16:56:00Z

Cool. Give me a minute...

Re: E3D J head hot end

2015-07-31T16:15:06Z

It should be printed right on there or you can post a picture and we will tell you.
The steppers are removable on the Sanguinololu and are not on the PrinterBoard. This will tell me what links to provide to get you the right set of instructions.

Re: E3D J head hot end

2015-07-31T16:09:53Z

Where would I find that on the board?

Re: E3D J head hot end

2015-07-30T23:54:55Z

You will be absolutely amazed at the difference. Consider buying a HobbedGoblin while ordering from filastruder. With the E3d Miore will be more pronounced and a smaller drive gear will help reduce that. Then read up on the required firmware change in the WIKI. If you have questions just ask and I'll be happy to walk you through it.
What control board is on your SD3? That's the first question to be answered.

Re: E3D J head hot end

2015-07-30T22:22:06Z

I have a solidoodle 3..currently unmolested, but I am looking to do the bearing upgrade this weekend and the hotend/fan upgrade next week.