<![CDATA[SoliForum - 3D Printing Community — Panelolu has arrived]]> 2012-10-17T22:30:43Z PunBB https://www.soliforum.com/topic/118/panelolu-has-arrived/ <![CDATA[Re: Panelolu has arrived]]> macmub wrote:

Maybe a very stupid question but what sort of solder should be used?

You should use lead-free silver-based rosin core, but 70/30 lead tin rosin core is SO much easier to work with.

If you haven't soldered components before, get a cheap board and some parts from radioshack and go for it.  Find out how much your iron takes before it burns a trace.  See how much solder it takes to fill a hole.  There's lots of how-to's out there.

B

]]> https://www.soliforum.com/user/206/ 2012-10-17T22:30:43Z https://www.soliforum.com/post/2487/#p2487 <![CDATA[Re: Panelolu has arrived]]> I've gathered together the tools I think I'm going to need for the soldering.  I was planning to put together the cable and assemble the panel first and then tackle the board upgrade.  I'm starting to think I want to solder on the headers and upgrade the chip first just to get it over with.  Once I have the headers on, I can try out the SD reader by itself and make sure that aspect is working before adding in the LCD.

I haven't done any electronics work before, so I'm adding to my own tools and skillset.  I got a anti-static wrist strap and an anti-static mat to work on, a helping hands, and a solder iron with a very narrow tip which can be changed.

]]> https://www.soliforum.com/user/14/ 2012-08-25T02:32:56Z https://www.soliforum.com/post/735/#p735 <![CDATA[Re: Panelolu has arrived]]> Maybe a very stupid question but what sort of solder should be used?

]]> https://www.soliforum.com/user/10/ 2012-08-25T01:42:30Z https://www.soliforum.com/post/734/#p734 <![CDATA[Re: Panelolu has arrived]]> Great, thanks lawsy. Keep up the great work

]]> https://www.soliforum.com/user/10/ 2012-08-25T01:11:50Z https://www.soliforum.com/post/733/#p733 <![CDATA[Re: Panelolu has arrived]]> I'm part way through making hopefully a great guide as we speak.

Other tools I've used so far are:

-soldering iron
-masking tape
-wire stripper
-scissors
-small piers

Don't think there will be much else.

]]> https://www.soliforum.com/user/51/ 2012-08-25T01:09:34Z https://www.soliforum.com/post/732/#p732 <![CDATA[Re: Panelolu has arrived]]> Just ordered my kit. Preassembled, soldered with sdsl & lcd. I really don't know if I have the ability to solder/assemble this thing to the printer. Just hoping 1 of you guys write up a great walk trough so I'll work up my confidence to do it. Is there anything apart from this kit that I'll need? Thanks guys

]]> https://www.soliforum.com/user/10/ 2012-08-25T00:25:15Z https://www.soliforum.com/post/731/#p731 <![CDATA[Re: Panelolu has arrived]]> macmub wrote:

This is where lawsy purchased im pretty sure

http://www.ebay.com/itm/RepRap-Panelolu … 088wt_1186


Hi,

in the ebay offer was also a interesting link:
http://blog.think3dprint3d.com/2012/06/ … depth.html
This helped me to understand things better.
I think I will go for PC-/MAC-less printing.

Regards
wolfi

]]> https://www.soliforum.com/user/64/ 2012-08-22T23:45:22Z https://www.soliforum.com/post/689/#p689 <![CDATA[Re: Panelolu has arrived]]> This is where lawsy purchased im pretty sure

http://www.ebay.com/itm/RepRap-Panelolu … 088wt_1186

]]> https://www.soliforum.com/user/10/ 2012-08-22T22:07:11Z https://www.soliforum.com/post/687/#p687 <![CDATA[Re: Panelolu has arrived]]> Same here, ebay, choosed pre-soldered. Also bought a new RepRap Sanguinololu 1.3a Complete electronics solution from them which gives me a new board to play around with, also included 3 more endstops and the headers pre-soldered for the lcd

]]> https://www.soliforum.com/user/12/ 2012-08-22T21:38:23Z https://www.soliforum.com/post/684/#p684 <![CDATA[Re: Panelolu has arrived]]> I bought mine from the ebay shop of the same people, except on ebay they seem to have drop downs for the pre soldered option.

]]> https://www.soliforum.com/user/51/ 2012-08-22T20:16:24Z https://www.soliforum.com/post/681/#p681 <![CDATA[Re: Panelolu has arrived]]> I got it through emaker.com.  Actually it was direct from Think3DPrint3D.  If you want the soldering done for you, you have to send them an email requesting it and they will send a PayPal invoice for the order.

]]> https://www.soliforum.com/user/14/ 2012-08-22T19:10:30Z https://www.soliforum.com/post/680/#p680 <![CDATA[Re: Panelolu has arrived]]> Ian, did you get yours from ebay or from a retailer? if from ebay, what seller?

]]> https://www.soliforum.com/user/35/ 2012-08-22T18:46:15Z https://www.soliforum.com/post/678/#p678 <![CDATA[Re: Panelolu has arrived]]> I've had a quick go and separated the wires, all labelled individually as they appear in the tutorial instructions.

Those instructions rely on the user following the wiring schematic at the top of the instructions. As I do so, I plan to make a more clear cut set of step by step instructions.

Probably won't be until the weekend though.

]]> https://www.soliforum.com/user/51/ 2012-08-22T08:19:40Z https://www.soliforum.com/post/671/#p671 <![CDATA[Re: Panelolu has arrived]]> Mine has also arrived. Trying to figure out how the extra wires apart from the 22 broadband should go.
Solidoodle hasn´t arrived yet though, so have some time to fiddle around with the Panelolu LCD.

]]> https://www.soliforum.com/user/12/ 2012-08-22T07:25:25Z https://www.soliforum.com/post/670/#p670 <![CDATA[Re: Panelolu has arrived]]> Mine came in yesterday.  I'm getting started with printing the case, using one that was recently uploaded to Thingiverse that also includes legs so it can stand up.

It looks like they included the headers to add to the sanguinololu, which was considerate.  I still need to get the stuff I need to make a static free work area before I get into it.  I also wanted to get the printing done while everything is working in case I mess something up.

]]> https://www.soliforum.com/user/14/ 2012-08-22T04:26:59Z https://www.soliforum.com/post/668/#p668