<![CDATA[SoliForum - 3D Printing Community — SoliPrint issues- Never Reach Temperature]]> 2015-07-15T03:21:00Z PunBB https://www.soliforum.com/topic/11740/soliprint-issues-never-reach-temperature/ <![CDATA[Re: SoliPrint issues- Never Reach Temperature]]> I thought Soliprint software was only for the Press at this stage... My advice would be to stick to Repetier Host.

So you can reach 215C via repetier? Job done. smile

Y Axis torque is probably not a software issue. You need to look at:
* Y-axis belt alignment
* Y-axis stepper driver Vref (current control) setting
* Clean and lightly lubricate the y-axis rails regularly

]]> https://www.soliforum.com/user/4515/ 2015-07-15T03:21:00Z https://www.soliforum.com/post/101194/#p101194 <![CDATA[SoliPrint issues- Never Reach Temperature]]> Using Solidoodle Workbench, have numerous issues and have yet to get a successful print (Repetier Host). I am in the process of getting my Y axis to shake due to not enough torque but this topic is about why I cannot reach 215 right extruder and 105 bed temperature. The printer just sits at 205 and 103 and never reaches temperature with any amount of time. In Repetier Host, I can at least reach a desired temperature. I was wondering if the Y Axis torque issue I have been having might be solved using Soliprint.

Any suggestions?

]]> https://www.soliforum.com/user/11435/ 2015-07-12T01:50:03Z https://www.soliforum.com/post/100917/#p100917