<![CDATA[SoliForum - 3D Printing Community — Solidoodle 2 Power Supply]]> 2015-07-17T18:14:50Z PunBB https://www.soliforum.com/topic/11701/solidoodle-2-power-supply/ <![CDATA[Re: Solidoodle 2 Power Supply]]> my fault tought its for an sd2 sorry than.

]]> https://www.soliforum.com/user/11394/ 2015-07-17T18:14:50Z https://www.soliforum.com/post/101404/#p101404 <![CDATA[Re: Solidoodle 2 Power Supply]]> Mahkz wrote:

wire all 12v and all - together for getting 2 kabels.

leave the thinner one untouched

And put the yellow and blue together otherwise it will be in "Waiting mode"

You are a little behind. He cant use the xbox supply as it puts out 12 volts and he needs 24 volts for his printer.

]]> https://www.soliforum.com/user/7731/ 2015-07-16T21:47:20Z https://www.soliforum.com/post/101362/#p101362 <![CDATA[Re: Solidoodle 2 Power Supply]]> wire all 12v and all - together for getting 2 kabels.

leave the thinner one untouched

And put the yellow and blue together otherwise it will be in "Waiting mode"

]]> https://www.soliforum.com/user/11394/ 2015-07-16T21:44:32Z https://www.soliforum.com/post/101361/#p101361 <![CDATA[Re: Solidoodle 2 Power Supply]]> thanks for your time !!!

]]> https://www.soliforum.com/user/11452/ 2015-07-16T15:45:48Z https://www.soliforum.com/post/101309/#p101309 <![CDATA[Re: Solidoodle 2 Power Supply]]> wardjr wrote:
userksh14 wrote:

Hi, i have the same situation with my SD press; I have a xbox power supply but not really sure how to connect it, the xbox has several wires 3 thick yellow and one thinner (yellow) that supouse to be the 12v and 3 thick black and 1 thinner ; the SD press conector has 4 pins, two of them are the 12v but when and 2 de gnd , but when I cut it is only one wire.

Hope i made my self clear, could you advice what you did?  thanks

The Press is a 24v system so ensure you have the correct PSU.

Xbox outputs 12v.

]]> https://www.soliforum.com/user/221/ 2015-07-15T23:49:06Z https://www.soliforum.com/post/101276/#p101276 <![CDATA[Re: Solidoodle 2 Power Supply]]> userksh14 wrote:

Hi, i have the same situation with my SD press; I have a xbox power supply but not really sure how to connect it, the xbox has several wires 3 thick yellow and one thinner (yellow) that supouse to be the 12v and 3 thick black and 1 thinner ; the SD press conector has 4 pins, two of them are the 12v but when and 2 de gnd , but when I cut it is only one wire.

Hope i made my self clear, could you advice what you did?  thanks

The Press is a 24v system so ensure you have the correct PSU.

]]> https://www.soliforum.com/user/2291/ 2015-07-15T23:23:32Z https://www.soliforum.com/post/101271/#p101271 <![CDATA[Re: Solidoodle 2 Power Supply]]> Hi, i have the same situation with my SD press; I have a xbox power supply but not really sure how to connect it, the xbox has several wires 3 thick yellow and one thinner (yellow) that supouse to be the 12v and 3 thick black and 1 thinner ; the SD press conector has 4 pins, two of them are the 12v but when and 2 de gnd , but when I cut it is only one wire.

Hope i made my self clear, could you advice what you did?  thanks

]]> https://www.soliforum.com/user/11452/ 2015-07-15T20:12:26Z https://www.soliforum.com/post/101240/#p101240 <![CDATA[Re: Solidoodle 2 Power Supply]]> i just did this mod and it works verry well !

]]> https://www.soliforum.com/user/11394/ 2015-07-11T12:25:04Z https://www.soliforum.com/post/100864/#p100864 <![CDATA[Solidoodle 2 Power Supply]]> I broke my 120w standart Power Supply

i have a broken xbox 360 with an powersupply here can i use this?

12V 14,2A
Input AC
200-240~2,5A, 47-63Hz

sould have 170.4 W

is it possible?

]]> https://www.soliforum.com/user/11394/ 2015-07-08T13:28:48Z https://www.soliforum.com/post/100640/#p100640