<![CDATA[SoliForum - 3D Printing Community — since my printer is down]]> 2015-05-26T12:37:05Z PunBB https://www.soliforum.com/topic/11272/since-my-printer-is-down/ <![CDATA[Re: since my printer is down]]> Manx wrote:

well here it is i have to add the electronics then recalibrate it. i don't like how the linear bearings sound they sound stiff

use a little 3-in-1 oil on the rods and work the bearings back and forth thru it, they should loosen up a bit. Ours were a bit stiff initially as well. after a little oil on the rods they run very smoothly now.

I do wipe the rods down periodically to remove dust & other debris and re-oil - but we live on a dirt road so dust is a big issue - even with the windows closed!

]]> https://www.soliforum.com/user/10399/ 2015-05-26T12:37:05Z https://www.soliforum.com/post/97036/#p97036 <![CDATA[Re: since my printer is down]]> I may have to do the same you are; my printer is down (started the lawsy carriage upgrade and my boyfriend's dog ate one of the pieces) so I might as well strip out the electronics and what not and paint the thing. I hate the bare metal look when I could have something a little more festive.

]]> https://www.soliforum.com/user/2752/ 2015-05-26T12:14:46Z https://www.soliforum.com/post/97032/#p97032 <![CDATA[Re: since my printer is down]]> yes it looks good specially with the blue i just need to re hook the electronics then see how it goes

]]> https://www.soliforum.com/user/168/ 2015-05-25T23:46:11Z https://www.soliforum.com/post/97000/#p97000 <![CDATA[Re: since my printer is down]]> That hammered Rustoleum is a lot of fun isn't it?
Nice work so far

]]> https://www.soliforum.com/user/4188/ 2015-05-25T15:28:34Z https://www.soliforum.com/post/96958/#p96958 <![CDATA[Re: since my printer is down]]> well here it is i have to add the electronics then recalibrate it. i don't like how the linear bearings sound they sound stiff

]]> https://www.soliforum.com/user/168/ 2015-05-25T07:15:28Z https://www.soliforum.com/post/96935/#p96935 <![CDATA[Re: since my printer is down]]> going with a hammered iron rustoleum paint with dark blue carriages and fittings other wise it will be the original black fo things i haven't printed

had a set back as i installed the lm8uu bearings i noticed some of the ball bearings popped out fortunately i have spares but im a tad disappointed

]]> https://www.soliforum.com/user/168/ 2015-05-25T02:39:34Z https://www.soliforum.com/post/96923/#p96923 <![CDATA[since my printer is down]]> since my printer is down i've decided to take it apart and do some of the upgrades. fortunately i have all the parts i need printed. some will need to be drilled some but over all i should be good to go. I'll take photos of everything and let you guys see how it goes right now i'm going to spray the case

]]> https://www.soliforum.com/user/168/ 2015-05-24T18:36:13Z https://www.soliforum.com/post/96899/#p96899