<![CDATA[SoliForum - 3D Printing Community — error code 0033]]>2016-02-21T23:19:03ZPunBBhttps://www.soliforum.com/topic/11097/error-code-0033/<![CDATA[Re: error code 0033]]>Getting an error code 0033?]]>https://www.soliforum.com/user/13724/2016-02-21T23:19:03Zhttps://www.soliforum.com/post/117172/#p117172<![CDATA[Re: error code 0033]]>I think I have like 100 hrs on mine now...having problems getting the print to stick now as well...going back and forth with tech support.....I have a trailer hitch cover printing right now.....hopefully.....I'm at work lol]]>https://www.soliforum.com/user/10773/2015-05-29T05:16:45Zhttps://www.soliforum.com/post/97377/#p97377<![CDATA[Re: error code 0033]]>I manually turned they z axis to get the print bed out of the way.
Doing my first real print now. took a wile playing with it until I got it level and sticking well enough to try a print. printing replacement shaft mounts right now
]]>https://www.soliforum.com/user/10955/2015-05-29T04:43:24Zhttps://www.soliforum.com/post/97374/#p97374<![CDATA[Re: error code 0033]]>Thanks for the info but mine magically went away.... my problem was with the error code I couldn't move the print bed up to even look into the rotating pedestal]]>https://www.soliforum.com/user/10773/2015-05-29T01:09:04Zhttps://www.soliforum.com/post/97367/#p97367<![CDATA[Re: error code 0033]]>I had this Error message when I first turned on the printer. I was able to fix this fairly quickly. First I checked to see if the turn table moved. It does. Then I checked to see if any wires had come lose and none had. there are two sets of wires one to the step motor and another to the sensor inside the turntable. So then I unscrewed the top of the turn table. lifted it off to see the purple wires leading to sensor had come lose. They had not. However the turn table was not positioned correctly. There is a small hole in the ring that needs to move past the sensor. repositioning this so the hole was on the sensor. Turned on the printer and it now boots up with no error message.]]>https://www.soliforum.com/user/10955/2015-05-28T23:15:53Zhttps://www.soliforum.com/post/97357/#p97357<![CDATA[error code 0033]]>i bought a xyz da vinci 1.0 aio printer and it arrived today..i had a error code 0031 and looked on this forum and found how to fix it "by bringing the extruder to the front and making sure the right and left side where even and forcing it by hand if they werent" and that fixed the error code 0031 but now i have an error code 0033 which is turtable abnormalities..i was wondering if anyone has had this error code and knows how to fix it..]]>https://www.soliforum.com/user/10773/2015-05-12T02:07:21Zhttps://www.soliforum.com/post/95535/#p95535