<![CDATA[SoliForum - 3D Printing Community — Lost in Github FreeLSS install]]> 2018-02-06T15:17:58Z PunBB https://www.soliforum.com/topic/11039/lost-in-github-freelss-install/ <![CDATA[Re: Lost in Github FreeLSS install]]> http://soliforum.com/i/?M26vJcH.jpg

hey @hariu526
i am having these errors and i cant understand what it really is , could you please help me

]]> https://www.soliforum.com/user/18349/ 2018-02-06T15:17:58Z https://www.soliforum.com/post/142215/#p142215 <![CDATA[Re: Lost in Github FreeLSS install]]> I did use the sd card it came with (and it worked, before upgrading via the web interface)
I just downloaded the new byop image and installed that last night, and now everything is working correctly.

Thanks!

]]> https://www.soliforum.com/user/14155/ 2016-04-06T12:24:23Z https://www.soliforum.com/post/120608/#p120608 <![CDATA[Re: Lost in Github FreeLSS install]]> Odd but looks like your system is missing libjpeg.  Did you use the SD card that came with the ATLAS 3D kit?  I'm not in front of a Pi right now but the command should be the following.

sudo apt-get install libjpeg

Then reboot.

- Uriah

]]> https://www.soliforum.com/user/4789/ 2016-04-05T22:33:44Z https://www.soliforum.com/post/120562/#p120562 <![CDATA[Re: Lost in Github FreeLSS install]]> I finally put together my kickstarter Atlas this w/e. When I first powered up, it didn't recognize the USB wifi dongle (even though I changed config file for my SSID). So I connected a cable to get going.

Under Settings, I selected Upgrade (seemed like a good idea at the time), and now the web server won't even start on the Pi. There's an error message when the Pi boots: "/usr/local/bin/freelss: error while loading shared libraries: libjpeg.so.62: cannot open shared object file: No such file or directory"

Thoughts anyone?

]]> https://www.soliforum.com/user/14155/ 2016-04-05T21:18:35Z https://www.soliforum.com/post/120551/#p120551 <![CDATA[Re: Lost in Github FreeLSS install]]> Got it!  Of course I see that it is impossible to do that as soon as I sent the email.  :-(

When I power up, the Pi has lights, but does NOT get as far as getting an IP and appearing on the network (I have been doing all the work via ssh).  So, my plan is to take out the card and run it in another Pi.  The Pi in the Atlas is a Pi 2 and the Pi I will work on is the V1B+.  Will that matter for compilation etc?

Got the camera cable last night.

Thanks.

]]> https://www.soliforum.com/user/10214/ 2015-11-19T15:17:09Z https://www.soliforum.com/post/109840/#p109840 <![CDATA[Re: Lost in Github FreeLSS install]]> Graham,

You should power it via the electronics board and not the Pi.

Uriah

]]> https://www.soliforum.com/user/4789/ 2015-11-19T11:44:18Z https://www.soliforum.com/post/109829/#p109829 <![CDATA[Re: Lost in Github FreeLSS install]]> If I have the electronics board connected, can I simply put power into the Pi to d these updates, or is it a requirement to use the electronics board to power the whole system once connected?

Cheers

G

]]> https://www.soliforum.com/user/10214/ 2015-11-16T16:59:44Z https://www.soliforum.com/post/109689/#p109689 <![CDATA[Re: Lost in Github FreeLSS install]]> hairu526 wrote:

New features are added pretty regularly.  Sometimes these new features require additional dependencies.  If you purchased an ATLAS 3D then you should update via the ATLAS 3D software itself instead of Github.

Uriah

I assume that I have to get it running first :-))  I am a KS backer and an thing to put things together for the first time using the acrylic kit.

Cheers

]]> https://www.soliforum.com/user/10214/ 2015-11-16T15:35:54Z https://www.soliforum.com/post/109682/#p109682 <![CDATA[Re: Lost in Github FreeLSS install]]> New features are added pretty regularly.  Sometimes these new features require additional dependencies.  If you purchased an ATLAS 3D then you should update via the ATLAS 3D software itself instead of Github.

Uriah

]]> https://www.soliforum.com/user/4789/ 2015-11-16T12:57:16Z https://www.soliforum.com/post/109668/#p109668 <![CDATA[Re: Lost in Github FreeLSS install]]> Will do, but I did copy and paste it from this thread.........

Cheers

]]> https://www.soliforum.com/user/10214/ 2015-11-16T05:34:02Z https://www.soliforum.com/post/109659/#p109659 <![CDATA[Re: Lost in Github FreeLSS install]]> You are missing a few dependencies.  Please recheck the command listed on the Github page again.

]]> https://www.soliforum.com/user/4789/ 2015-11-16T00:28:17Z https://www.soliforum.com/post/109641/#p109641 <![CDATA[Re: Lost in Github FreeLSS install]]> I got the same error as AZERATE when installing form Github.  Is there something amiss with the Github instructions?

I ran the command above "sudo apt-get install libpng-dev libjpeg-dev cmake vlc git-core gcc build-essential unzip sqlite3 libsqlite3-dev libmicrohttpd-dev libcurl4-openssl-dev"

and re-ran the freelss github get.

Now I get the following:

cd freelss
pi@AtlasPi ~/freelss $ cd src
pi@AtlasPi ~/freelss/src $ make
g++ -c -O3 -Wall -Winvalid-pch -fexceptions -I/usr/local/include -I/opt/vc/include -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux -I/opt/vc/include/interface -I/opt/vc/include/interface/mmal/util -I../contrib Main.h -o Main.h.gch
Main.h:53:19: fatal error: iwlib.h: No such file or directory
#include <iwlib.h>
                   ^
compilation terminated.
Makefile:28: recipe for target 'Main.h.gch' failed
make: *** [Main.h.gch] Error 1

any help appreciated.

Cheers

]]> https://www.soliforum.com/user/10214/ 2015-11-15T22:11:16Z https://www.soliforum.com/post/109625/#p109625 <![CDATA[Re: Lost in Github FreeLSS install]]> Neither right now , I just just wanted to make sure I didn't miss any step of the calibrations . I know I had to adjust drivers on my printer and didn't know if this adjustment was needed on the scanner. Thanks for your great work.  Bill D

]]> https://www.soliforum.com/user/5384/ 2015-05-14T01:00:25Z https://www.soliforum.com/post/95748/#p95748 <![CDATA[Re: Lost in Github FreeLSS install]]> slimstar2 wrote:

Hairu526 , Just working on calibrating after 3 tries  i am getting pretty good scans . I will keep tweaking it . Is there any adjustments for the stepper driver?

Slimstar, that's great to hear!  You shouldn't need to adjust the stepper motor, we calibrate the stepper drivers before we ship them out.  Are you looking to control the motor speed or the torque?

]]> https://www.soliforum.com/user/4789/ 2015-05-13T23:09:35Z https://www.soliforum.com/post/95734/#p95734 <![CDATA[Re: Lost in Github FreeLSS install]]> Hairu526 , Just working on calibrating after 3 tries  i am getting pretty good scans . I will keep tweaking it . Is there any adjustments for the stepper driver?

]]> https://www.soliforum.com/user/5384/ 2015-05-13T02:03:57Z https://www.soliforum.com/post/95641/#p95641