<![CDATA[SoliForum - 3D Printing Community — Firmware 1.1.j - what files should be on the Card - 0040]]> 2015-05-10T16:20:58Z PunBB https://www.soliforum.com/topic/11003/firmware-11j-what-files-should-be-on-the-card-0040/ <![CDATA[Re: Firmware 1.1.j - what files should be on the Card - 0040]]> I posted the files on my sdcard - look for my post (I forgot which one...)  Probably won't help your situation, though.

]]> https://www.soliforum.com/user/9607/ 2015-05-10T16:20:58Z https://www.soliforum.com/post/95373/#p95373 <![CDATA[Re: Firmware 1.1.j - what files should be on the Card - 0040]]> I have done the dremel cut out mod so I can access the SD card. I have found the push the SD card ALL the way gives me the 0040 error. If I pull it back about 1mm the 0040 goes away...But then I get the 0013 error about max heat bed temp...its as cold as.

]]> https://www.soliforum.com/user/7994/ 2015-05-10T04:25:37Z https://www.soliforum.com/post/95339/#p95339 <![CDATA[Firmware 1.1.j - what files should be on the Card - 0040]]> I have don over 200 hrs of printing. Went do one tonight and get the 0040 error/issue.
Took the SD card out and reseated it. Still getting the error...with 0013 occassionally (heatbed max temp...but its cold as it was off).
On the card are Gcodes and a DAT file.
Should there be anything else? eg a bin file
I downloaded the fw 1.1.J bin file and copied it on. Should I have extracted the bin file or something?

Thank you

Unrelated mods: MK2b PCB heatbead with Borosilcate glass bulldog clipped on.
xyZERO cart bluetooth

]]> https://www.soliforum.com/user/7994/ 2015-05-03T12:46:13Z https://www.soliforum.com/post/94781/#p94781