<![CDATA[SoliForum - 3D Printing Community — PLA prints start and stops problems]]> 2015-05-10T03:17:08Z PunBB https://www.soliforum.com/topic/10989/pla-prints-start-and-stops-problems/ <![CDATA[Re: PLA prints start and stops problems]]> dont have a fan blowing on it but i did fix the problem with some extrusion calibration.  working on hooking up my nozzle fan to it one of these days.

]]> https://www.soliforum.com/user/8278/ 2015-05-10T03:17:08Z https://www.soliforum.com/post/95336/#p95336 <![CDATA[Re: PLA prints start and stops problems]]> Do you have a fan blowing on the print? Start with that - it can even be a desk fan. You shouldn't need any more than 60C bed temperature for adhesion, and take off your enclosure if you have one. Although I think you've got a calibration issue, you need to deal with the melting aspect first.

]]> https://www.soliforum.com/user/7321/ 2015-05-02T16:29:35Z https://www.soliforum.com/post/94721/#p94721 <![CDATA[PLA prints start and stops problems]]> I recently started started messing with PLA instead of ABS and i seem to have ugly start and stops.
first one is aligned and second is random. random works waaay better but when i print these in ABS the starts are not nearly as noticable.
http://soliforum.com/i/?cKj7QFQ.jpg


Im wondering if this is a Slic3r thing or my calibration is just off.

I have a Solidoodle 2 and im guessing my nozzle Dia. is .4mm so am supposed to get .48mm wall thickness? ive been printing hollow cubes with 3 vertical shells and measuring. i was originally at 1.2mm but if its supposed to be .48mm thickness then it should be  1.44?

]]> https://www.soliforum.com/user/8278/ 2015-05-02T16:23:37Z https://www.soliforum.com/post/94720/#p94720