Followed the instructions for Thing 707530 and changed Thing 620454 to fit in the Divinci carriage. I add bearings to the tension wheel. I used the original Davinci 5Volt fan (11 cfms) not the Pico 12 volt (6 cfms). It prints so nice now. No problems with PLA or ABS. The Pico hot end is a work of art. I am running Repetier firmware on a Hackintosh system. I did have to file down and shape the E3d V6 parts for a better fit. Used the longer screws from the Davinci's fan mount on the upper mount. The originals are to short. No problems with the thermistor readings or temps. It's spot on. Give this mod a go when your ready. You won't be disappointed with the results.
