<![CDATA[SoliForum - 3D Printing Community — Acrylic extruder parts]]> 2015-08-18T16:50:31Z PunBB https://www.soliforum.com/topic/10937/acrylic-extruder-parts/ <![CDATA[Re: Acrylic extruder parts]]> I'm not sure about e3d's tolerances or my printer's tolerances on the matter, but I have one heatsink that fits the mk5 very well and another that wobbles. I put one wrap of electrical tape around the groove of the heatsink and it fit well.

]]> https://www.soliforum.com/user/7321/ 2015-08-18T16:50:31Z https://www.soliforum.com/post/103806/#p103806 <![CDATA[Re: Acrylic extruder parts]]> sinkingship wrote:

A few questions:

1. Does the piece of plywood in the original extruder get integrated into the mk5? If so how?

2. Is a piece of steel or aluminum used to attach the hot end firmly to the body of the mk5?

3. What are the 2 holes hanging off of the bottom of the mk5 body used for? Mounting a cooling fan?

1) Nope! Save it for building a fire wink
2) If properly printed, no.
3) The two holes on the sides? On the right side, screw in an M3 screw. This is for your endstop. If you do not add this screw, it will slam, give a horrid banging sound, and give you quite a scare.

]]> https://www.soliforum.com/user/4188/ 2015-08-18T16:19:13Z https://www.soliforum.com/post/103805/#p103805 <![CDATA[Re: Acrylic extruder parts]]> 1.) no
2.) no, it is not needed
3.) endstop triggers

]]> https://www.soliforum.com/user/221/ 2015-08-18T16:18:36Z https://www.soliforum.com/post/103804/#p103804 <![CDATA[Re: Acrylic extruder parts]]> Wardjr, thank you for uploading the files for the mk5.

A few questions:

1. Does the piece of plywood in the original extruder get integrated into the mk5? If so how?

2. Is a piece of steel or aluminum used to attach the hot end firmly to the body of the mk5?

3. What are the 2 holes hanging off of the bottom of the mk5 body used for? Mounting a cooling fan?

Thanks.

]]> https://www.soliforum.com/user/5697/ 2015-08-18T15:29:16Z https://www.soliforum.com/post/103802/#p103802 <![CDATA[Re: Acrylic extruder parts]]> You are most welcome, sounds like things are working well.

]]> https://www.soliforum.com/user/2291/ 2015-06-28T14:21:24Z https://www.soliforum.com/post/100066/#p100066 <![CDATA[Re: Acrylic extruder parts]]> Big shout to wardjr

Finally fitted the Ed3 v6 hot end and the printer is working better than ever. Big thanks for your help and advice.

]]> https://www.soliforum.com/user/10389/ 2015-06-28T14:18:11Z https://www.soliforum.com/post/100065/#p100065 <![CDATA[Re: Acrylic extruder parts]]> 100% infill ABS at .3 is perfect.

]]> https://www.soliforum.com/user/2291/ 2015-04-27T19:35:38Z https://www.soliforum.com/post/94305/#p94305 <![CDATA[Re: Acrylic extruder parts]]> Top man!

Part ordered and files downloaded.

Thanks again, I will print the parts at work tomorrow.

Mike

]]> https://www.soliforum.com/user/10389/ 2015-04-27T19:34:36Z https://www.soliforum.com/post/94304/#p94304 <![CDATA[Re: Acrylic extruder parts]]> And the tension arm

]]> https://www.soliforum.com/user/2291/ 2015-04-27T19:29:53Z https://www.soliforum.com/post/94302/#p94302 <![CDATA[Re: Acrylic extruder parts]]> and here is the filament guide

]]> https://www.soliforum.com/user/2291/ 2015-04-27T19:28:40Z https://www.soliforum.com/post/94301/#p94301 <![CDATA[Re: Acrylic extruder parts]]> Here is the MK5 body

]]> https://www.soliforum.com/user/2291/ 2015-04-27T19:27:50Z https://www.soliforum.com/post/94300/#p94300 <![CDATA[Re: Acrylic extruder parts]]> For shipping reasons you may want to order direct from E3d.

]]> https://www.soliforum.com/user/2291/ 2015-04-27T19:25:48Z https://www.soliforum.com/post/94298/#p94298 <![CDATA[Re: Acrylic extruder parts]]> Thanks again. I will order a 12v ed3 now. I do have access to a 3d printer at work so could print the MK5 straight away. Could you send me the link.

Thanks

Mike

]]> https://www.soliforum.com/user/10389/ 2015-04-27T19:21:31Z https://www.soliforum.com/post/94296/#p94296 <![CDATA[Re: Acrylic extruder parts]]> SD2,3&4 were all 12v.
The MK5 you get from there is designed to fit the V-6 and are only a temporary.  They are designed to get you printing again so you can print a higher quality one.  When you get to that point let me know and I'll link the file.  Alternately you may find one you like better on thingiverse.  Just ensure it is for the V6 and not the V5 as they are different.
In the mean time study up on the firmware change the instructions are in the WIKI.  If you don't know what board you have let me know and I can help you sort it out.

]]> https://www.soliforum.com/user/2291/ 2015-04-27T19:16:27Z https://www.soliforum.com/post/94295/#p94295 <![CDATA[Re: Acrylic extruder parts]]> Wow! Thanks for the fast reply. I have just been on there website and will order an E3d. I have the solidoodle 2 gen, do I need the 12v or 24v. Sorry for the question but I'm not sure.

thanks

Mike

]]> https://www.soliforum.com/user/10389/ 2015-04-27T19:11:50Z https://www.soliforum.com/post/94294/#p94294