PLEASE HELP
IN MY REPITIER HOST HOME KEYS ARE WORKING BUT ON MANUAL CONTROL THERE IS NO MOVEMENT OF STEPPers.
PLEASE
its urgent and final year project
Are you getting an error code?
]]>Tin,how much did your SD4 take to be shipped to you?
Well IIRC about a week to get it and another week to get the PS. But I purchased mine about 9 months ago and picked it up used.
so no bearing on current ship times from SD.
Tin
EDIT: netfabb didnt work
]]>but check this for export of stl from solidworks
export STL from SolidWorks
File > Save As
Set Save As Type to STL
Options > Fine > OK
Save
STL settings: How to change STL settings
File > Save As
STL > Options
For a smoother STL file, change the Resolution to Custom
Change the deviation to 0.0005in (0.01 mm)
Change the angle to 5 (Smaller deviations and angles will produce a smoother file, but the file size will get larger)SolidWorks 2000 and later
Saving a model design in STL formatSolidWorks allows you to save model designs in STL format, at all levels of design, for both individual parts and assemblies, including the ability to save a multi-bodied model as a single STL. To save a model or a model assembly in STL Format:
From the File menu, select Save as. The Save As dialog box opens.
From the Save as type drop-down menu, select STL (*.stl).
Click Options... The Export Options dialog box appears, and the model is displayed in tessellated view. STL is the File Format selection.
In the Export Options dialog box, in the “Output as” section, select Binary. (The resulting file size will be much smaller than a file saved in ASCII format.)
In the “Resolution” section, select the appropriate option. If you select Custom, you can manually adjust the Deviation and Angle settings, as needed. These settings affect the tessellation of non-planar surfaces, as follows:
Lower Deviation settings result in finer tessellation.
Lower Angle settings result in with greater accuracy, noticeable in small details.
As a rule, the higher the resolution, the larger the size of the file, and the longer it takes to generate.
For Single Material Builds Make sure that the following check box is selected: Save all components of an assembly in a single file. This ensures that all components are saved as a single STL file.
For Dual Material Builds Make sure that the following check box is NOT selected: Save all components of an assembly in a single file. This ensures that all components are saved as separate STL files.
Click OK.
In the Save As dialog box, click Save.
In the confirmation message, click Yes.
It is not displaying the object correctly,
i tried checking in solidworks if the problem was in the part, but it looked perfect,
i thought it was a error in that file, so i loaded another part
Same happened
The objects are not loeaded properly, by some reason.
Thanks in advance
PD: im thinking on buying a SD 4, and in the store it says this:
but in support they display a something completely different time. 
Anyone could tell me which one is the real shipping time?