2015-04-09T19:08:12Z PunBB https://www.soliforum.com/topic/10734/extruder-getting-lost/ I think I read somewhere that the pulleys not being secured to the axes can be a problem with shifting layers, and that tightening them might help. Worth a try?

]]> https://www.soliforum.com/user/10314/ 2015-04-09T19:08:12Z https://www.soliforum.com/post/92565/#p92565 if something is causing the stepper motor to bind its called a jog.  since there is no encoder on the steppers the machine always assumes it knows where it is.  can you here it binding?  does it do it if you move the print another part of the table?

]]> https://www.soliforum.com/user/10400/ 2015-04-09T14:29:20Z https://www.soliforum.com/post/92518/#p92518 Thanks I didn't know this term. I'm looking for some infos here and I'll make some tests with belt or try another filament. I'm using the stock firmware.

]]> https://www.soliforum.com/user/9030/ 2015-04-09T14:18:10Z https://www.soliforum.com/post/92517/#p92517 Its called layer shifting and if you have REP .092 theres a support group over at voltivo.com

]]> https://www.soliforum.com/user/8171/ 2015-04-09T12:59:48Z https://www.soliforum.com/post/92510/#p92510 Yesterday I started to use Simplify 3D. I could print some other parts, but this one failed twice. But knowing that could be a slice problem, it's a good start...

]]> https://www.soliforum.com/user/9030/ 2015-04-09T12:47:25Z https://www.soliforum.com/post/92509/#p92509 Its probably the xyz slicer. Does it do it with other prints or just that one?

]]> https://www.soliforum.com/user/10385/ 2015-04-09T12:39:53Z https://www.soliforum.com/post/92508/#p92508 Do you guys know what could cause this kind of problem? Sometimes the extruder goes out the layer and continue to print at other part of object. I'm using a third part filament that I've put at an empty cartridge. Maybe a wrong fill?

]]> https://www.soliforum.com/user/9030/ 2015-04-09T12:21:37Z https://www.soliforum.com/post/92507/#p92507