<![CDATA[SoliForum - 3D Printing Community — problems with vref]]> 2015-04-08T12:56:28Z PunBB https://www.soliforum.com/topic/10692/problems-with-vref/ <![CDATA[Re: problems with vref]]> For the cost of shipping I would think you could find a better replacement board.  Knowing how to adjust and fix is a good thing.  I am glad SD is offering to help but that isn't how I'd spend my money.

]]> https://www.soliforum.com/user/2291/ 2015-04-08T12:56:28Z https://www.soliforum.com/post/92387/#p92387 <![CDATA[Re: problems with vref]]> Manx wrote:

no plastic or ceramic screwdrivers

I called solidoodle to see if they had replacements they do not. However they have offered to help . I send my printer to them at my cost they will replace the board and make sure its calibrated properly then ship it back. i'm going to package it up tomorrow and send it out tomorrow

I hope they get you taken care of quickly.

That said, it is still worth it to pick up a ceramic screwdriver (or a set) to have on hand for future use.

the vrefs on my SD4 were way out of adjustment - especially the extruder! it was nearly 4 times what it was supposed to be.

]]> https://www.soliforum.com/user/9487/ 2015-04-08T12:47:52Z https://www.soliforum.com/post/92383/#p92383 <![CDATA[Re: problems with vref]]> no plastic or ceramic screwdrivers

I called solidoodle to see if they had replacements they do not. However they have offered to help . I send my printer to them at my cost they will replace the board and make sure its calibrated properly then ship it back. i'm going to package it up tomorrow and send it out tomorrow

]]> https://www.soliforum.com/user/168/ 2015-04-08T03:50:03Z https://www.soliforum.com/post/92364/#p92364 <![CDATA[Re: problems with vref]]> Oh no! "Popped off" sounds a bit dire - the SD boards have the stepper drivers incorporated, while other solutions use the Pololu-style carrier boards that can be replaced (adjustment knob and all).

If it's not working, you'll need a new board.

See if radio shack has plastic screwdrivers - might be helpful for next time! smile

]]> https://www.soliforum.com/user/4515/ 2015-04-07T04:17:51Z https://www.soliforum.com/post/92254/#p92254 <![CDATA[Re: problems with vref]]> oh if anyone is interested radioshack started their closeout of their stores right now its 10-50% off their arduino kits are 10% off but not sure if they have what i need to fix machine

all components are 50% off though

]]> https://www.soliforum.com/user/168/ 2015-04-06T21:13:34Z https://www.soliforum.com/post/92222/#p92222 <![CDATA[Re: problems with vref]]> well the good news is it came back up after i shut everything down and turned off the computer and then unplugged the printer and let it sit. bad news the adjustment button did pop off and now they axis motor isn't working right. so i think i'll still need a new board

or maybe atleast 1 stepper controller and maybe more competence tongue

]]> https://www.soliforum.com/user/168/ 2015-04-06T21:11:59Z https://www.soliforum.com/post/92221/#p92221 <![CDATA[Re: problems with vref]]> The original SD's used a Sanguinololu and the newer boards used a PrinterBoard.
There are many to choose from
Ramps
Rambo
Azteeg
Rumba
along with many others.
I guess you need to ask yourself if you are trying to upgrade as long as you find yourself in this situation?
Than I would go Rumba or Azteeg x3

]]> https://www.soliforum.com/user/2291/ 2015-04-06T20:57:31Z https://www.soliforum.com/post/92219/#p92219 <![CDATA[Re: problems with vref]]> I followed the instructions but got a spark now my printer is dead so i obviously managed to fry the fing board.

so what boards are recommended for the sd3 as a replacement when you have to replace the fing board

]]> https://www.soliforum.com/user/168/ 2015-04-06T20:25:06Z https://www.soliforum.com/post/92213/#p92213 <![CDATA[Re: problems with vref]]> Manx wrote:

Ok so i think i've got the problem narrowed down now to the vref for the Y-axis

my problem isi don't know where i'm supposed to measure from
the wiki shows the new board not what i have

i've provided a photo of my module and the closest image i could find online

http://3.bp.blogspot.com/-xok5Bz5FB6I/U … G_0803.JPG

Its in this link
http://wiki.solidoodle.com/multimeter-testing

]]> https://www.soliforum.com/user/10022/ 2015-04-06T10:50:23Z https://www.soliforum.com/post/92139/#p92139 <![CDATA[problems with vref]]> Ok so i think i've got the problem narrowed down now to the vref for the Y-axis

my problem isi don't know where i'm supposed to measure from
the wiki shows the new board not what i have

i've provided a photo of my module and the closest image i could find online

http://3.bp.blogspot.com/-xok5Bz5FB6I/U … G_0803.JPG

]]> https://www.soliforum.com/user/168/ 2015-04-06T03:15:23Z https://www.soliforum.com/post/92125/#p92125