<![CDATA[SoliForum - 3D Printing Community — Heat bed won't heat]]> 2015-03-25T20:44:07Z PunBB https://www.soliforum.com/topic/10493/heat-bed-wont-heat/ <![CDATA[Re: Heat bed won't heat]]> Thanks for the help everybody, it's back up and running again, and Solidoodle is sending me a new heat bed so I'll have a spare!

]]> https://www.soliforum.com/user/10142/ 2015-03-25T20:44:07Z https://www.soliforum.com/post/90832/#p90832 <![CDATA[Re: Heat bed won't heat]]> Found the unused ones I had from Pololu.com

#1164 - 2 pin Female JST XH-style Cable (15cm)
#1934 - JST RCY Connector Pack Female
#1935 - JST RCY Connector Pack Male

Good Luck!!

Ski

]]> https://www.soliforum.com/user/3790/ 2015-03-22T16:45:46Z https://www.soliforum.com/post/90501/#p90501 <![CDATA[Re: Heat bed won't heat]]> Thank you so much!

]]> https://www.soliforum.com/user/10142/ 2015-03-22T15:16:22Z https://www.soliforum.com/post/90478/#p90478 <![CDATA[Re: Heat bed won't heat]]> Search 1901 for the connectors, then 1801 for the wires at Pololu.com
You will want their wires since they are pre-crimped and slide right into the connector. Leave yourself a few inches of slack then cut the new wire and splice into the stock wires.

]]> https://www.soliforum.com/user/4188/ 2015-03-22T15:11:34Z https://www.soliforum.com/post/90477/#p90477 <![CDATA[Re: Heat bed won't heat]]> I've been looking thru digikey trying to find the right connector, anyone know which one it is?

]]> https://www.soliforum.com/user/10142/ 2015-03-22T14:05:41Z https://www.soliforum.com/post/90475/#p90475 <![CDATA[Re: Heat bed won't heat]]> As long as its'  just the connector and not the board, you can replace them with JST's pretty cheap - like <1.00 for 3 from places like Polou and many others.
Don't give up the ship!  Others should chime in with some more help.

]]> https://www.soliforum.com/user/3790/ 2015-03-22T09:09:04Z https://www.soliforum.com/post/90466/#p90466 <![CDATA[Re: Heat bed won't heat]]> Now the connector burned up.

]]> https://www.soliforum.com/user/10142/ 2015-03-22T02:18:22Z https://www.soliforum.com/post/90442/#p90442 <![CDATA[Re: Heat bed won't heat]]> Ski52 wrote:

I would track the wiring down.  Mine is an older SD2, but did the same.  Found it to be a wire had come out of the connector on the print board - a little manipulation - and back in business.
How a stationary wire comes out of a stationary connector....????

Thermodynamics.  The stock molex plug is underrated for the current so it heats up and expands.

]]> https://www.soliforum.com/user/7321/ 2015-03-21T15:03:59Z https://www.soliforum.com/post/90373/#p90373 <![CDATA[Re: Heat bed won't heat]]> Thank you! That was exactly what it was!

]]> https://www.soliforum.com/user/10142/ 2015-03-21T14:54:12Z https://www.soliforum.com/post/90371/#p90371 <![CDATA[Re: Heat bed won't heat]]> I would track the wiring down.  Mine is an older SD2, but did the same.  Found it to be a wire had come out of the connector on the print board - a little manipulation - and back in business.
How a stationary wire comes out of a stationary connector....????

]]> https://www.soliforum.com/user/3790/ 2015-03-21T14:47:51Z https://www.soliforum.com/post/90370/#p90370 <![CDATA[Heat bed won't heat]]> Hi I just got my Solidoodle 4, when I first got it running, the heat bed worked fine, I printed a calibration cube and it turned out great. However, Now whenever I click heat bed in Repetier host, the bed doesn't heat at all. Any ideas?

]]> https://www.soliforum.com/user/10142/ 2015-03-21T14:14:10Z https://www.soliforum.com/post/90369/#p90369