thanks

I've just finished to assemble my 3D scanner.
I bought a Waveshare ir camera model (F) with adjustable focus and to connected to a Pi model 2.
I made an aluminum frame with a wooden turn-table but now I've some problems with the setup.
Does anyone have never made a similar solution? There is a lens correction on the software?

I've installed FreeLSS 1.11.

Thanks.

Nice community and one amazing scanner with excellent results.
I am now waiting patiently to get my software licence.
(I'm sorry but I had to buy the parts in Europe to skip VAT and customs taxes)

After a quick and easy assembly I now have  a few test scans that look impressively good considering the lack of calibration.

Setup is RPI3 + Camera V2, wifi connected, currently running freelss from github.

I will have to calibrate it better but am now playing with it while waiting for the licence to arrive. No 8MP available at the moment, I will dig deeper after software is complete and up to date.

Cheers Uriah!

See you all around!

Thanks
Franlit

Thanks I save the new Serial Number.
A view of my first scan
It s a cat (without any change)
If you have any tips.
Franlit

- Uriah

It's Work i calibrate the scanner and update the software without problem.
I try to do a first scan but the stl is wrong.
the Log

FreeLSS Version: 1.18
Preset: High Resolution
Range: 360 degrees
Total Seconds per frame:    3.88545
Unaccounted time:    0.457622%
Image Acquisition:    50.9998%, 1.98157 seconds per frame.
Image Processing:    44.4122%, 1.72561 seconds per frame.
Laser Time:    0.000899144%, 3.49358e-05 seconds per frame.
Point Mapping:    0.473045%
Point Processing:    0.379305%
Table Rotation:    3.16418%
Laser Merging:    0.050208%
PLY Writing:    0.0383587%
STL Writing:    0.0154993%
XYZ Writing:    0%
Facetization:    0.00891217%
Num Frame Retries:    0
Num Frames:    800
Num Empties:    0
Point Memory:    0 MB
Total Time (min):    51.806

presets.Calibration.laserSide=1
presets.Calibration.cameraMode=4
presets.Calibration.laserThreshold=8
presets.Calibration.minLaserWidth=5
presets.Calibration.maxLaserWidth=80
presets.Calibration.maxObjectSize=215.9
presets.Calibration.maxTriangleEdgeLength=12
presets.Calibration.numLaserRowBins=4
presets.Calibration.stabilityDelay=100000
presets.Calibration.framesPerRevolution=800
presets.Calibration.generateXyz=0
presets.Calibration.generateStl=1
presets.Calibration.generatePly=1
presets.Calibration.groundPlaneHeight=0
presets.Calibration.laserMergeAction=0
presets.Calibration.plyDataFormat=1
presets.Calibration.enableBurstModeForStillImages=0
presets.Calibration.createBaseForObject=1
presets.Calibration.noiseRemovalSetting=2
presets.Calibration.imageThresholdMode=2
presets.Calibration.cameraExposureTime=0
presets.Default.laserSide=2
presets.Default.cameraMode=2
presets.Default.laserThreshold=20
presets.Default.minLaserWidth=5
presets.Default.maxLaserWidth=80
presets.Default.maxObjectSize=215.9
presets.Default.maxTriangleEdgeLength=12
presets.Default.numLaserRowBins=4
presets.Default.stabilityDelay=100000
presets.Default.framesPerRevolution=800
presets.Default.generateXyz=0
presets.Default.generateStl=1
presets.Default.generatePly=1
presets.Default.groundPlaneHeight=0
presets.Default.laserMergeAction=0
presets.Default.plyDataFormat=1
presets.Default.enableBurstModeForStillImages=0
presets.Default.createBaseForObject=1
presets.Default.noiseRemovalSetting=2
presets.Default.imageThresholdMode=2
presets.Default.cameraExposureTime=4
presets.High Resolution.laserSide=2
presets.High Resolution.cameraMode=0
presets.High Resolution.laserThreshold=8
presets.High Resolution.minLaserWidth=5
presets.High Resolution.maxLaserWidth=80
presets.High Resolution.maxObjectSize=215.9
presets.High Resolution.maxTriangleEdgeLength=12
presets.High Resolution.numLaserRowBins=4
presets.High Resolution.stabilityDelay=100000
presets.High Resolution.framesPerRevolution=800
presets.High Resolution.generateXyz=0
presets.High Resolution.generateStl=1
presets.High Resolution.generatePly=1
presets.High Resolution.groundPlaneHeight=0
presets.High Resolution.laserMergeAction=0
presets.High Resolution.plyDataFormat=1
presets.High Resolution.enableBurstModeForStillImages=0
presets.High Resolution.createBaseForObject=1
presets.High Resolution.noiseRemovalSetting=2
presets.High Resolution.imageThresholdMode=2
presets.High Resolution.cameraExposureTime=0
presets.High Resolution.active=1
setup.cameraLocation.x=0
setup.cameraLocation.y=82.55
setup.cameraLocation.z=260.35
setup.leftLaserLocation.x=-125.73
setup.leftLaserLocation.y=82.55
setup.leftLaserLocation.z=260.35
setup.rightLaserLocation.x=125.73
setup.rightLaserLocation.y=82.55
setup.rightLaserLocation.z=260.35
setup.rightLaserPin=4
setup.leftLaserPin=5
setup.motorEnablePin=0
setup.motorStepPin=7
setup.motorDirPin=1
setup.motorDirPinValue=0
setup.laserOnValue=1
setup.stepsPerRevolution=3200
setup.motorResponseDelay=2
setup.motorStepDelay=5000
setup.httpPort=80
setup.serialNumber=ADETVZ26
setup.unitOfLength=2
setup.haveLaserPlaneNormals=0
setup.enableLighting=0
setup.lightingPin=3
setup.enableAuthentication=0
setup.passwordHash=
setup.enableUsbNetworkConfig=1
setup.enableExperimental=0
setup.enableWebGLWhenAvailable=1
setup.enablePointCloudRenderer=1
setup.overrideFocalLength=0
setup.overriddenFocalLength=

Do you see anything wrong ? have you tips

You can log into the command prompt with a username of "pi" and a password of "raspberry", and then configure your WiFi with the instructions in the "Advanced" section of the instructions document.  After that, you can update the software to the latest version and use a USB stick to get your IP address in the future.

- Uriah

I can now try  to go with the USB Stick or ?

Thanks for your help
Franlit