Thankfully I'm now able to print PLA and ABS both with great results now I've modded my printer (yes only 2 weeks old!) with a mk8 extruder like the one in the photo below;
It's made a big difference :-)
]]>Or you want to keep warranty, or you use some newest hardware revisions and flashing is not possible like da vinci Jr, Mini, Nano and maybe some others , otherwise there is no point.
]]>I edited the script of chmp with the optional material settings and added the color options with all available colors so you can choose the right for your filament.
]]>I am the owner of an da vinci 1.1 plus and it is just for the optic but, is it possible to change the displaying color?
so I have an natural cartridge but filled with blue so in my opinion it should display also blue.
by the way the rest is perfectly working I added some more temps. for my use. And boom the cartridge is like new.
]]>//Materials
//char mt[] = {0x41}; //ABS
//char mt[] = {0x50}; //PLA
char mt[] = {0x46}; //Flex
I must say after spending three weeks with my plus I was still frustrated at the whole cartridge reset and xyz blocking firmware. In addition I prefer PLA over ABS just due to the fact the material is harder and better suited for my drone building needs. Btw I have two complete UNO and Nano with chip reset dongles if anyone wants to make me an offer, it will be on ebay soon.
Anyway, I returned to Amazon and ordered ROBO R1 instead. I can't tell you how much fun and delightful to be able to print consistently and there are so many addons I have done that has made the printer even more of a useful tool. I added Octoprint and LCD display so now I can do any type of prints remotely including monitoring w a 5mb webcam and video still recording a playback. I never need to attach a computer to the printer. It is always connected to raspi and I just use the web ui. I can reset, change temps, send gcode, converts stl to gcode w cura, so many more...
Thanks all in this forum for previous help. I'm on a more joyous road now.
Glad to hear that. I was considering one of those as well. I just gotta sell my 2.0.
]]>Anyway, I returned to Amazon and ordered ROBO R1 instead. I can't tell you how much fun and delightful to be able to print consistently and there are so many addons I have done that has made the printer even more of a useful tool. I added Octoprint and LCD display so now I can do any type of prints remotely including monitoring w a 5mb webcam and video still recording a playback. I never need to attach a computer to the printer. It is always connected to raspi and I just use the web ui. I can reset, change temps, send gcode, converts stl to gcode w cura, so many more...
Thanks all in this forum for previous help. I'm on a more joyous road now.
]]>@landin81 - I have a DaVinci 1.0A and Firmware version 1.0.1 and it works well with that.
Do you have a newer firmware version and XYZ printing firmware is blocking the settings?
I have the 1.0.6 firmware and simplify3d
]]>Do you have a newer firmware version and XYZ printing firmware is blocking the settings?
]]>I put in value e230 for extruder.
and b050 for bed.
I also put in the same values in the simplify3d.
I have just started a print and the printer preheats:
its now stay solid on 212 for extruder and its up on 87 and rising on the bed temp. =/
Did anyone get this to work correct. dont think its a good idea to print PLA with a bed thats 90degree C =/
EDIT: And suddenly the extruder stopped to feed the PLA.. Totaly stop, and clicked alot from the feeder.
Didnt work to go in to the menu and feed the filament.. Changed back to ABS and it worked fine again.. =/
I'm still excited about your TFT uno. Waiting for your final results.
Thanks for sharing.
]]>Thankfully I'm now able to print PLA and ABS both with great results now I've modded my printer (yes only 2 weeks old!) with a mk8 extruder like the one in the photo below;
It's made a big difference :-)
]]>