<![CDATA[SoliForum - 3D Printing Community — SD4 with 2 extruders?!?]]>2015-03-07T04:51:45ZPunBBhttps://www.soliforum.com/topic/10284/sd4-with-2-extruders/<![CDATA[Re: SD4 with 2 extruders?!?]]>If this was done purpose as a customer service issue to compensate for your wait, it is brilliant. Excellent move, and would go a long way to changing Solidoodle's reputation for bad customer service. If it wasn't done on purpose, it should have been--for everyone who has had to wait months.]]>https://www.soliforum.com/user/9095/2015-03-07T04:51:45Zhttps://www.soliforum.com/post/88669/#p88669<![CDATA[Re: SD4 with 2 extruders?!?]]>Everything worked perfect after adding glass plate with kapton and hairspray. Here is my first print. It is about the size of a pingpong ball and took about 45 mins to print.]]>https://www.soliforum.com/user/8991/2015-03-07T00:07:39Zhttps://www.soliforum.com/post/88642/#p88642<![CDATA[Re: SD4 with 2 extruders?!?]]>About every 10 prints tops]]>https://www.soliforum.com/user/2291/2015-03-06T23:16:58Zhttps://www.soliforum.com/post/88628/#p88628<![CDATA[Re: SD4 with 2 extruders?!?]]>How often do I need to hairspray? before each print or after 2-3?]]>https://www.soliforum.com/user/8991/2015-03-06T22:58:35Zhttps://www.soliforum.com/post/88624/#p88624<![CDATA[Re: SD4 with 2 extruders?!?]]>Thanks. I will get me a piece of glass and some hairspray after work and try this out.]]>https://www.soliforum.com/user/8991/2015-03-06T16:11:18Zhttps://www.soliforum.com/post/88579/#p88579<![CDATA[Re: SD4 with 2 extruders?!?]]>105 - 110]]>https://www.soliforum.com/user/2291/2015-03-06T15:37:42Zhttps://www.soliforum.com/post/88576/#p88576<![CDATA[Re: SD4 with 2 extruders?!?]]>Roger that. I will give it a try. Thanks. So with the glass method, what temperature is best to run my bed? I was gradually bumping it up up up trying to get it to not lift. But with the glass and an adhesive I would assume I can run it cooler. For the record I got my best print on some roughed up kapton (sanded with 220 grit) and my bed temp at 105.]]>https://www.soliforum.com/user/8991/2015-03-06T14:40:01Zhttps://www.soliforum.com/post/88569/#p88569<![CDATA[Re: SD4 with 2 extruders?!?]]>Aquanet on glass is the way to go. The purple can is extreme hold...good stuff]]>https://www.soliforum.com/user/4188/2015-03-06T14:05:13Zhttps://www.soliforum.com/post/88565/#p88565<![CDATA[Re: SD4 with 2 extruders?!?]]>Sadly I had lifting problems. I got it to print up about 1/4" before it completely lifted off the plate. I need to get some acetone to make some juice or some hairspray. I will do that on my way home from work today.
The portion that did print was pretty smooth even at a 3mm setting and the layering looked good though.
]]>https://www.soliforum.com/user/8991/2015-03-06T13:49:27Zhttps://www.soliforum.com/post/88562/#p88562<![CDATA[Re: SD4 with 2 extruders?!?]]>How did it turn out? Pics?]]>https://www.soliforum.com/user/4188/2015-03-06T04:16:54Zhttps://www.soliforum.com/post/88532/#p88532<![CDATA[Re: SD4 with 2 extruders?!?]]>So I've got my frankindoodle printing its first item. It is just some random skull I found on thingiverse. After I am sure it is all working right I will have to look at the 2 extruder printing.]]>https://www.soliforum.com/user/8991/2015-03-05T22:06:49Zhttps://www.soliforum.com/post/88483/#p88483<![CDATA[Re: SD4 with 2 extruders?!?]]>jagowilson wrote:
Next up is the Solidoodle workbench press apprentice 4
LOL
]]>https://www.soliforum.com/user/4188/2015-03-05T20:39:40Zhttps://www.soliforum.com/post/88468/#p88468<![CDATA[Re: SD4 with 2 extruders?!?]]>Next up is the Solidoodle workbench press apprentice 4]]>https://www.soliforum.com/user/7321/2015-03-05T19:03:26Zhttps://www.soliforum.com/post/88456/#p88456<![CDATA[Re: SD4 with 2 extruders?!?]]>Nice!]]>https://www.soliforum.com/user/9121/2015-03-05T18:41:54Zhttps://www.soliforum.com/post/88454/#p88454<![CDATA[Re: SD4 with 2 extruders?!?]]>Wow.]]>https://www.soliforum.com/user/221/2015-03-05T18:32:39Zhttps://www.soliforum.com/post/88453/#p88453