<![CDATA[SoliForum - 3D Printing Community — How to use 3rd party filament without repetier or resetting the EEPROM]]> 2015-03-07T14:45:11Z PunBB https://www.soliforum.com/topic/10263/how-to-use-3rd-party-filament-without-repetier-or-resetting-the-eeprom/ <![CDATA[Re: How to use 3rd party filament without repetier or resetting the EEPROM]]> carl_m1968 wrote:
tonyno wrote:

I tried to run OpenXYZWare, but, get the same errors that other people note on that forum.

Are you putting the Openware exe in your XYZ ware directory? The open version requires the original version to be on your system and it is tequited for the open version to be placed in the original versions directory. If I remember right it actually replaces the original versions exe. It needs all the other files the original used to run though.

Yes, I did all that was recommended.

]]> https://www.soliforum.com/user/8582/ 2015-03-07T14:45:11Z https://www.soliforum.com/post/88700/#p88700 <![CDATA[Re: How to use 3rd party filament without repetier or resetting the EEPROM]]> tonyno wrote:

I tried to run OpenXYZWare, but, get the same errors that other people note on that forum.

Are you putting the Openware exe in your XYZ ware directory? The open version requires the original version to be on your system and it is tequited for the open version to be placed in the original versions directory. If I remember right it actually replaces the original versions exe. It needs all the other files the original used to run though.

]]> https://www.soliforum.com/user/7731/ 2015-03-07T01:36:55Z https://www.soliforum.com/post/88656/#p88656 <![CDATA[Re: How to use 3rd party filament without repetier or resetting the EEPROM]]> Muledog17 wrote:

3DP01P

Yours is a 1.0, that is why you where able to do it. If you had a 1.0A then your serial number whould start as 3DP01A.

If it was sold to you as a 1.0A then got into the mix up as well with distributors not knowing there was a difference or how to tell the difference.

]]> https://www.soliforum.com/user/7731/ 2015-03-07T01:32:33Z https://www.soliforum.com/post/88655/#p88655 <![CDATA[Re: How to use 3rd party filament without repetier or resetting the EEPROM]]> I tried to run OpenXYZWare, but, get the same errors that other people note on that forum.

]]> https://www.soliforum.com/user/8582/ 2015-03-06T23:58:48Z https://www.soliforum.com/post/88641/#p88641 <![CDATA[Re: How to use 3rd party filament without repetier or resetting the EEPROM]]> 3DP01P

]]> https://www.soliforum.com/user/8750/ 2015-03-06T23:55:54Z https://www.soliforum.com/post/88640/#p88640 <![CDATA[Re: How to use 3rd party filament without repetier or resetting the EEPROM]]> Muledog17 wrote:

I did it with mine. You just have to short JP1 on the printer and send the firmware with arduino IDE

What are the first 6 digits of your serial number?

]]> https://www.soliforum.com/user/7731/ 2015-03-06T23:39:15Z https://www.soliforum.com/post/88636/#p88636 <![CDATA[Re: How to use 3rd party filament without repetier or resetting the EEPROM]]> You have the old 1.0

]]> https://www.soliforum.com/user/8801/ 2015-03-06T22:24:45Z https://www.soliforum.com/post/88619/#p88619 <![CDATA[Re: How to use 3rd party filament without repetier or resetting the EEPROM]]> I did it with mine. You just have to short JP1 on the printer and send the firmware with arduino IDE

]]> https://www.soliforum.com/user/8750/ 2015-03-06T21:55:38Z https://www.soliforum.com/post/88615/#p88615 <![CDATA[Re: How to use 3rd party filament without repetier or resetting the EEPROM]]> You should note that there is no downgrading to 1.1.E for the newer Da Vinci 1.0A.

]]> https://www.soliforum.com/user/8801/ 2015-03-06T21:35:19Z https://www.soliforum.com/post/88612/#p88612 <![CDATA[Re: How to use 3rd party filament without repetier or resetting the EEPROM]]> You can find it here. http://voltivo.com/forum/davinci-softwa … e-open-mod

]]> https://www.soliforum.com/user/8750/ 2015-03-06T19:28:51Z https://www.soliforum.com/post/88603/#p88603 <![CDATA[Re: How to use 3rd party filament without repetier or resetting the EEPROM]]> Where can you find OpenXYZWare?

]]> https://www.soliforum.com/user/9918/ 2015-03-06T18:35:43Z https://www.soliforum.com/post/88594/#p88594 <![CDATA[How to use 3rd party filament without repetier or resetting the EEPROM]]> All you have to do is downgrade to 1.1.E and use OpenXYZWare. It doesn't count down the amount of plastic you use. Have fun!

]]> https://www.soliforum.com/user/8750/ 2015-03-04T12:45:16Z https://www.soliforum.com/post/88222/#p88222