<![CDATA[SoliForum - 3D Printing Community — Cannot downgrade firmware]]> 2015-03-06T05:21:05Z PunBB https://www.soliforum.com/topic/10261/cannot-downgrade-firmware/ <![CDATA[Re: Cannot downgrade firmware]]> Ye I came across that mod and have put that down as one of the candidates, looks like I should go back and have second look, thanks a lot man I will look into it and hopefully that would solve all these filament cost and ABS not stick onto the print bed issue in one go. Thanks a lot!

]]> https://www.soliforum.com/user/9888/ 2015-03-06T05:21:05Z https://www.soliforum.com/post/88535/#p88535 <![CDATA[Re: Cannot downgrade firmware]]> And you also need to download slic3r. You should be able to find that by googling it.

]]> https://www.soliforum.com/user/8750/ 2015-03-05T12:28:51Z https://www.soliforum.com/post/88395/#p88395 <![CDATA[Re: Cannot downgrade firmware]]> http://voltivo.com/forum/davinci-softwa … e-open-mod     Calibrate your printer before you print for the first time. Happy printing!

]]> https://www.soliforum.com/user/8750/ 2015-03-05T12:27:31Z https://www.soliforum.com/post/88394/#p88394 <![CDATA[Re: Cannot downgrade firmware]]> That would be AWESOME!!!

]]> https://www.soliforum.com/user/9888/ 2015-03-05T02:50:42Z https://www.soliforum.com/post/88346/#p88346 <![CDATA[Re: Cannot downgrade firmware]]> Do you need a link for open xyzware?

]]> https://www.soliforum.com/user/8750/ 2015-03-05T02:10:07Z https://www.soliforum.com/post/88328/#p88328 <![CDATA[Re: Cannot downgrade firmware]]> Sweet! I thought it was the printer firmware itself that counts the remaining filament, right I will look into it. Also I have been thinking about raising the printer bed temperature for a while coz the sticking issue has been very annoying and so far what I've heard is either get some print bed tape or rise the print bed temperature, except I live too far away from the US so it will cost me an arm and a leg to ship some over, I guess some modded xyzware might do the trick.

]]> https://www.soliforum.com/user/9888/ 2015-03-05T02:03:19Z https://www.soliforum.com/post/88327/#p88327 <![CDATA[Re: Cannot downgrade firmware]]> No problem. Also if you downgrade to 1.1.E and use the open xyzware mod you don't need the resetter.

]]> https://www.soliforum.com/user/8750/ 2015-03-05T01:19:01Z https://www.soliforum.com/post/88322/#p88322 <![CDATA[Re: Cannot downgrade firmware]]>

You need to download DAVINCI_1_0_RESET.zip. The tutorial is in the zip file. It has every thing you need to do it except arduino IDE which can be downloaded on arduino a website.

I did it and it was actually pretty easy even though it seems hard.


Problem solved!!! Thanks a lot!!!! I will block the xyzware from accessing the internet from now on so I won't accidentally click the annoying upgrade button again. Thanks again!

]]> https://www.soliforum.com/user/9888/ 2015-03-04T22:30:32Z https://www.soliforum.com/post/88296/#p88296 <![CDATA[Re: Cannot downgrade firmware]]> Did you have any luck with that?

]]> https://www.soliforum.com/user/8750/ 2015-03-04T22:02:58Z https://www.soliforum.com/post/88290/#p88290 <![CDATA[Re: Cannot downgrade firmware]]> http://www.wctek.com/shop/content/9-downloads

You need to download DAVINCI_1_0_RESET.zip. The tutorial is in the zip file. It has every thing you need to do it except arduino IDE which can be downloaded on arduino a website.

I did it and it was actually pretty easy even though it seems hard.

]]> https://www.soliforum.com/user/8750/ 2015-03-04T13:52:42Z https://www.soliforum.com/post/88228/#p88228 <![CDATA[Re: Cannot downgrade firmware]]> Muledog17 wrote:

You need to short out JP1 and then push the J firmware to it with arduino IDE.


Hum...sounds harder than I thought it would be, where can I find the tutorial?

]]> https://www.soliforum.com/user/9888/ 2015-03-04T13:03:36Z https://www.soliforum.com/post/88225/#p88225 <![CDATA[Re: Cannot downgrade firmware]]> You need to short out JP1 and then push the J firmware to it with arduino IDE.

]]> https://www.soliforum.com/user/8750/ 2015-03-04T12:36:47Z https://www.soliforum.com/post/88219/#p88219 <![CDATA[Cannot downgrade firmware]]> Hey guys I am going to get a filament resetter for my DaVinci 1.0, and based on my research the firmware has to be lower than or equal to version "J", problem is I accidentally let it upgrade my printer to the latest firmware yesterday to 1.2.5 (see attached), and when I tried to downgrade it with the internet disabled the printer refused to accept the old firmware the simply says update failed on the LCD. Any ideas/suggestions?

Thanks a lot!!!

]]> https://www.soliforum.com/user/9888/ 2015-03-04T10:16:50Z https://www.soliforum.com/post/88214/#p88214