<![CDATA[SoliForum - 3D Printing Community — Motors not moving??]]> 2015-03-05T23:42:06Z PunBB https://www.soliforum.com/topic/10205/motors-not-moving/ <![CDATA[Re: Motors not moving??]]> Well, that sorts that one out.
Just as I clicked 'submit reply' I thought I'd have a look at the log in Repetier-Host.

I have a laptop dedicated to printing & it's screen isn't that big so the log is usually hidden.
I didn't even think of checking it when I had a problem.

Turns out that it's throwing errors due to not having the hot end thermistor attached.
I managed to break it whilst fitting the V6 & it's replacement should arrive within a couple of days.

It never occurred to me that the printer would need the thermistor to be able to move...

]]> https://www.soliforum.com/user/9656/ 2015-03-05T23:42:06Z https://www.soliforum.com/post/88503/#p88503 <![CDATA[Re: Motors not moving??]]> Attached is a photo of my mess of a machine.
I've just upgraded it to an E3D-V6 hot end.
Put everything back together, plugged everything in.

I can home all 3 axes.
I can not move x, y or z axes in any other way hmm

I've checked all the wiring & it seems fine.
Any suggestions?

]]> https://www.soliforum.com/user/9656/ 2015-03-05T23:30:57Z https://www.soliforum.com/post/88500/#p88500 <![CDATA[Re: Motors not moving??]]> Yay for easy fixes! smile

]]> https://www.soliforum.com/user/9487/ 2015-03-01T18:51:28Z https://www.soliforum.com/post/87720/#p87720 <![CDATA[Re: Motors not moving??]]> It was an easy fix.  In the settings it was set to "virtual printer". I changed that to the correct com port and it started working.

]]> https://www.soliforum.com/user/9835/ 2015-03-01T15:46:33Z https://www.soliforum.com/post/87698/#p87698 <![CDATA[Motors not moving??]]> I recently had a HD failure. My solidoodle 2 worked fine before but after I got a new HD and re-installed Repetier-Host Solidoodle V0.85b its not working. It connects OK the heaters seem to work but none of the motors do. I can't home, jog or extrude. Is this some easy fix?

21:20:47.107 : start
21:20:47.107 : ok
21:20:47.107 : ok
21:20:47.107 : N1 M111 S6 *70
21:20:47.107 : N2 M220 S100 *67
21:20:47.107 : N3 M221 S100 *67
21:20:47.122 : FIRMWARE_NAME:RepetierVirtualPrinter FIRMWARE_URL:____url banned__________ PROTOCOL_VERSION:1.0 MACHINE_TYPE:Mendel EXTRUDER_COUNT:1 REPETIER_PROTOCOL:1
21:20:47.122 : ok
21:20:47.122 : ok
21:20:47.122 : ok
21:20:47.122 : ok
21:20:47.122 : ok
21:20:47.138 : N4 M111 S6 *67
21:20:47.169 : ok
21:20:47.169 : ok
21:20:48.268 : ok
21:20:49.346 : N7 M104 S215 *68
21:20:49.362 : ok
21:20:49.377 : ok
21:20:50.487 : ok
21:20:51.565 : ok
21:20:51.799 : N11 M140 S100 *116
21:20:51.815 : ok
21:20:52.659 : ok
21:20:53.666 : ok
21:20:54.776 : ok
21:20:55.698 : N15 G28 X0 *79
21:20:55.729 : ok
21:20:55.791 : ok
21:20:56.870 : ok
21:20:57.135 : N18 G28 X0 Y0 Z0 *65
21:20:57.135 : ok
21:20:57.979 : ok
21:20:58.240 : N20 G28 Z0 *75
21:20:58.240 : ok
21:20:59.068 : ok
21:20:59.302 : N22 G28 Y0 *74
21:20:59.302 : ok
21:21:00.102 : ok
21:21:01.196 : ok
]]> https://www.soliforum.com/user/9835/ 2015-03-01T05:27:05Z https://www.soliforum.com/post/87681/#p87681