<![CDATA[SoliForum - 3D Printing Community — Broke wires to calibration pin]]> 2015-02-28T08:15:26Z PunBB https://www.soliforum.com/topic/10196/broke-wires-to-calibration-pin/ <![CDATA[Re: Broke wires to calibration pin]]> Flyboy55 wrote:

I was working in clearing a clog tonight on a old 1.0 I bought from a salvage shop. I accidentally cut the wires that go to the small calibration pin on the brass hothead. Is there any fix for this? 

Thanks for your time.


Those wires don't go to the pin, they go to the thermistor. You can get a new thermistor on ebay, but you will have to do the wiring yourself as they don't come with the necessary connector. otherwise you will have to replace the head through XYZprinting. Or talk to one of the guys here who is parting theirs and see if they will give you a good deal of the head.

http://www.soliforum.com/topic/10151/se … nci-parts/

]]> https://www.soliforum.com/user/7731/ 2015-02-28T08:15:26Z https://www.soliforum.com/post/87604/#p87604 <![CDATA[Broke wires to calibration pin]]> I was working in clearing a clog tonight on a old 1.0 I bought from a salvage shop. I accidentally cut the wires that go to the small calibration pin on the brass hothead. Is there any fix for this? 

Thanks for your time.

]]> https://www.soliforum.com/user/9822/ 2015-02-28T06:30:52Z https://www.soliforum.com/post/87602/#p87602