1 Topic by wardjr

  • wardjr
  • wardjr
  • Moderator
  • Offline
  • From: Minnesota
  • Registered: 2013-06-10
  • Posts: 5,623

Topic: Kraken/Cyclops/Chimera Mount

If figure this new section needs a topic so I will post the files for my SD linear bearing mount for my Kraken.  I will also work on the Cyclops/Chimera.
I don't have it installed yet, nor do I have pictures but it is all assembled just waiting to be installed. 
Print solid at .3 and no support (it is build in)
I will post up some photos tomorrow.

Happy Printing smile

Post's attachments

KrakenRBCAR.stl 21.08 kb, 35 downloads since 2015-01-08 

Kraken_Cyclops_base.stl 237.09 kb, 31 downloads since 2015-01-08 

You don't have the permssions to download the attachments of this post.
Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

wardjr's Website

2 Reply by Revolve3D

  • Revolve3D
  • Revolve3D
  • Member
  • Offline
  • From: White River Junction, Vermont
  • Registered: 2014-05-08
  • Posts: 111

Re: Kraken/Cyclops/Chimera Mount

I know most on here have solidoodles or other linear rod/bearing printers. The prototypes of the Revolve3D printer used initially openrail and now v slot rail.

I will post a v slot rail carriage when I receive my cyclops, but it will be a plate designed to be cut from aluminum. Im sure some can mill it and others could print it in t glase if anyone has a printer using v slot rails.

www.Revolve3D.com
[email protected]
3D Printer Filament, ABS Pellets, PLA pellets, Colorant, and Accessories

Revolve3D's Website

3 Reply by wardjr

  • wardjr
  • wardjr
  • Moderator
  • Offline
  • From: Minnesota
  • Registered: 2013-06-10
  • Posts: 5,623

Re: Kraken/Cyclops/Chimera Mount

As promised smile

http://i.imgur.com/eari8CT.jpg


http://i.imgur.com/ZIng0sr.jpg


I am waiting for 4 Volcano's to arrive before I install it.  That way I can run different size nozzles without limitation.

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

wardjr's Website