Topic: WAF curve
As promised in this thread ( http://www.soliforum.com/topic/2992/kiss-me/ ) .. do you think this model is WAF compliant ? (woman acceptance factor)
enought curves ?
You are not logged in. Please login or register.
SoliForum - 3D Printing Community → STL Sharing & Print Showoff → WAF curve
As promised in this thread ( http://www.soliforum.com/topic/2992/kiss-me/ ) .. do you think this model is WAF compliant ? (woman acceptance factor)
enought curves ?
<3
so you can download it now...
Thumbs up - downloading now
just an update...
after numerous request.. (at least 2 ..lol ) and as i was not totaly happy with the result that didn,t meet my quality critera..
i remade the model from scratch... this time , more curvy, less hair, less 'pregnant' look... more 'pink panther' like...
so.. the nude panther : back from the hairdresser is alive.. (test printing now..)
and she's ready for a sun bath on the tahiti beachs
little preview :
Much better. I thought the first one looked a little pregnant, but I didn't say anything because the last thing you should do is ask a girl if she is pregnant.
thanks.. I am always open to constructive criticism .. i need that to progress
I also was not going to say anything about the previous version. This one is marvelous!
She's online...
http://www.makershop.co/shop/fantasygra … panther-v2
no printed test as my hotend heater is dead during the end of it (*cry* :-( )
that is awesome that was printed on a solidoodle?
that is awesome that was printed on a solidoodle?
If you mean the white one yes, if you mean the red one no - thats a 3D model preview...
Final got a fan on my prints again so I could print this out. I must say, this came out really really well. This is .15 layer height, 2 perimeters, 10% infil, standard print speeds. Print time: 1h:46m
Sorry, all I had was my cell phone to take pictures. I should have my DSLR back today.
Wow, that really did coemout nicely. I'm constantly amazed at your print times though.. just how tweaked is your machine?
At 10% infill and only 2 perimeters, there isn't much here that would take time to print. these print times should be attainable by any machine.
realy nice print... but for mine at 0.2mm, 12%infill and 2 perimeter, it took 5 hours..
so.. seem you boost your timing somewhere... can you give you slic3r config to check what is different ?
thanks
Him, I'll check it out and upload that config when I get home. Maybe that was one of my own configs. I have quite a few Configs that I have sped up but I usually denote them. either way, I'll post it.
The slicer you use can have a huge difference in print times. KisSlicer regularly gives me much shorter print times than Slic3r does.
Just my 2 cents...
TiM
I didn't see anything crazy but here is my slicer config for that print. 1h 46m is what it shows as a finish time.
If you have slow down cooling turned off because you are using the fan instead, that will save a lot of time.
took some better pictures ... see above ^
can i use it on the model page ? the photo of the face is great..
Of course YSB.
thanks..
i think that with more than 3000 views, more than 580 download and 50 likes in 7 days, i think the challenge is successful
2n2r5 could you post some pics or vids of your SD3. it seems very modded, i just bought one and wondering what to do to mine to make it work
SoliForum - 3D Printing Community → STL Sharing & Print Showoff → WAF curve
Powered by PunBB, supported by Informer Technologies, Inc.