1 Topic by DrDFlo

  • DrDFlo
  • Newbie
  • Offline
  • Registered: 2017-02-07
  • Posts: 2

Topic: Snappy - Almost Entirely 3D Printed

After a couple of weeks of 3D printing and calibrating I have finally assembled a working Snappy. Snappy, created by RevarBat, is arguably the most 3D printable RepRap project. If your interested I have a build video found here: https://youtu.be/AMR9Lrf9uPM.

Cheers,

Dr. D-Flo

http://i.imgur.com/PSnqkw5.jpg

DrDFlo's Website

2 Reply by Tin Falcon (edited by Tin Falcon 2017-02-07 11:28:00)

  • Tin Falcon
  • Tin Falcon
  • Member
  • Offline
  • From: New Jersey, USA
  • Registered: 2014-08-01
  • Posts: 2,424

Re: Snappy - Almost Entirely 3D Printed

Interesting. Could you tell us what printer you printed this on. what material you used etc

Thiniverse fie here.

http://www.thingiverse.com/thing:1828359

Soliddoodle 4 stock w glass bed------Folger Tech Prusa 2020 upgraded to and titan /aero extruder mirror bed
FT5 with titan/ E3D Aero------MP mini select w glass bed
MP Utimate maker pro-W bondtech extruder
Marlin/Repetier Host/ Slic3r and Cura

3 Reply by DrDFlo

  • DrDFlo
  • Newbie
  • Offline
  • Registered: 2017-02-07
  • Posts: 2

Re: Snappy - Almost Entirely 3D Printed

Sure! I printed it on a Maker Gear M2 (200+ hours of printing) with PLA (25% infill). The project consumed about 3kg. Overall cost was $300. Firmware of course is Marlin on RAMPS 1.4. Let me know if you have any more questions. I accessed the viability of this printer in the video.

DrDFlo's Website

4 Reply by Tin Falcon

  • Tin Falcon
  • Tin Falcon
  • Member
  • Offline
  • From: New Jersey, USA
  • Registered: 2014-08-01
  • Posts: 2,424

Re: Snappy - Almost Entirely 3D Printed

Itend to prefer metal frames, but still interesting project thanks for sharing.

Soliddoodle 4 stock w glass bed------Folger Tech Prusa 2020 upgraded to and titan /aero extruder mirror bed
FT5 with titan/ E3D Aero------MP mini select w glass bed
MP Utimate maker pro-W bondtech extruder
Marlin/Repetier Host/ Slic3r and Cura