1 Topic by wagnmkr (edited by wagnmkr 2017-03-25 19:58:18)

  • wagnmkr
  • Member
  • Offline
  • From: Lindsay, Ontario, Canada
  • Registered: 2016-07-16
  • Posts: 110

Topic: (NO LONGER AVAILABLE) All Metal E3D Hotend 12volt 1.75 Universal

This is a brand new unit, in the bag, exactly as received from Filastruder. It hasn't been assembled. I didn't realize until it got here that it was 12 volt and I needed 24 volt.

It is the current cartridge model with the silicon boot.

I am asking 60.00 cdn. for it and I would split shipping.

Tom

I was cut out to be rich ... but ... I was sewn up all wrong!
Wanhao Duplicator I3 Plus with glass bed, MK10 All Metal Hot End

2 Reply by wardjr

  • wardjr
  • wardjr
  • Moderator
  • Offline
  • From: Minnesota
  • Registered: 2013-06-10
  • Posts: 5,623

Re: (NO LONGER AVAILABLE) All Metal E3D Hotend 12volt 1.75 Universal

You should reach out to Tim, I bet he'd be willing to arrange a swap.

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

wardjr's Website

3 Reply by Tin Falcon

  • Tin Falcon
  • Tin Falcon
  • Member
  • Offline
  • From: New Jersey, USA
  • Registered: 2014-08-01
  • Posts: 2,424

Re: (NO LONGER AVAILABLE) All Metal E3D Hotend 12volt 1.75 Universal

Yeah no need to sell it just get a 24v heater cartridge all other parts should be the same.

Soliddoodle 4 stock w glass bed------Folger Tech Prusa 2020 upgraded to and titan /aero extruder mirror bed
FT5 with titan/ E3D Aero------MP mini select w glass bed
MP Utimate maker pro-W bondtech extruder
Marlin/Repetier Host/ Slic3r and Cura

4 Reply by wagnmkr

  • wagnmkr
  • Member
  • Offline
  • From: Lindsay, Ontario, Canada
  • Registered: 2016-07-16
  • Posts: 110

Re: (NO LONGER AVAILABLE) All Metal E3D Hotend 12volt 1.75 Universal

Actually, at the time I found out that I made the mistake, Filistruder was out of the 24 volt one so I got one from England. So I also have a complete 24 volt one here as well. It might also go on the block soon as the unit I was going to build is on hold at this point. I am just trying to decide what to do .

Put it down to my tired old mind playing tricks on me again.

Tom

I was cut out to be rich ... but ... I was sewn up all wrong!
Wanhao Duplicator I3 Plus with glass bed, MK10 All Metal Hot End

5 Reply by wagnmkr

  • wagnmkr
  • Member
  • Offline
  • From: Lindsay, Ontario, Canada
  • Registered: 2016-07-16
  • Posts: 110

Re: (NO LONGER AVAILABLE) All Metal E3D Hotend 12volt 1.75 Universal

OK, so it looks like I am going to use this now that I have converted it to 24v, so it is no longer for sale.

Cheers

I was cut out to be rich ... but ... I was sewn up all wrong!
Wanhao Duplicator I3 Plus with glass bed, MK10 All Metal Hot End