1

Topic: 2015 Christmas Giveaway!!!!

Another great year has passed and it is that time again!!!

For those of you interested in donating to the Christmas Giveaway this year.  I would request that you post that information here up until Nov. 30 or send me a PM if you'd prefer.

To enter all you need to do is be a  contributing forum member with at least 10 (genuine) posts and ask to be entered here starting Dec. 1st through the 10th.  Yes, I will post up a reminder along with all of the details on Dec. 1st wink

Happy Holidays and as always Happy Printing from the SoliForum Staff

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

2

Re: 2015 Christmas Giveaway!!!!

Can't believe it's been a year since last Christmas...time flies when you're having fun!

I am donating 2 E3D Lites (12 or 24V):
http://www.filastruder.com/products/lite6

And 1 full (1KG) spool of MakerGeeks ABS Filament; color of winner's choice:
http://www.makergeeks.com/abs3dfibymaf.html

Shipping included to all US locations!

SD2 - Stock - Enclosure - Heated Bed - Glass Plate - Auto Fire Extinguisher
Ord Bot Hadron - RAMPS 1.4 - Bulldog XL - E3D v6 - 10" x 10" PCB Heated Build w/SSR - Glass Plate
Thanks for All of Your Help!

3 (edited by AZERATE 2015-11-30 21:53:03)

Re: 2015 Christmas Giveaway!!!!

I will be donating:
*Lawsy's carriages
*E3D Hobb Goblin with tension arm and radial bearing
*1kg of Inland filament- ABS or PLA as well as color will be winner's choice

Free US shipping, international respectfully pays their way smile

Printit Mason and Printit Horizon printers
Multiple SD2s- Bulldog XL, E3D v5/v6/Lite6, Volcano, Hobb Goblin, Titan, .9 motor, Lawsy carriages, direct Y drive, fishing line...the list goes on
Filawinder and Filastruder #1870.....worth every penny!

4

Re: 2015 Christmas Giveaway!!!!

I'll donate an Xacto knife set and a digital caliper.  You can give them away either together or separately.

-KHN

5

Re: 2015 Christmas Giveaway!!!!

I will offer up a set of Lawsy Carriages in the winner's color of choice - I have about 15 colors to choose from smile

SD4 #1 & #2 - Lawsy carriages, E3D v6, Rumba controller board, mirror bed plate, X motor fan, upgraded PSU & Mica bed heater
SD4 #3 - in the works ~ Folgertech FT-5, rev 1
Printit Industries Beta Tester - Horizon H1

6 (edited by Revolve3D 2015-12-01 16:54:50)

Re: 2015 Christmas Giveaway!!!!

I will gifting a 1Kg spool of 1.75mm ABS or 1.75mm PLA in one of the colors we offer. Winner picks material and color. Domestic shipping will be included.

Happy Holidays!

www.Revolve3D.com
[email protected]
3D Printer Filament, ABS Pellets, PLA pellets, Colorant, and Accessories

7

Re: 2015 Christmas Giveaway!!!!

I'm offering a Lite6, lightly used. I received it for free to test out before it went public, and I no longer use it, so I'd love to pass it on.

8

Re: 2015 Christmas Giveaway!!!!

Offering 3 store credits for www.filastruder.com:

$150
$100
$50

Merry Christmas!

9

Re: 2015 Christmas Giveaway!!!!

Just a little bump for those of you thinking you that would like to donate, I will be closing the donations at 12AM central time.  It can be anything printer related even if it's old junk laying around that someone may have a use for.
I will be donating three rolls of Taulman PCTPE one roll each to three people.
Tomorrow morning  I will start accepting entries for drawing.
Happy printing and thank you to all that have decided to share in the spirit of giving.

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

10

Re: 2015 Christmas Giveaway!!!!

It is officially time to put your name in the hat for the Christmas Giveaway


To enter all you need to do is be a  contributing forum member with at least 10 (genuine) posts and ask to be entered here starting Dec. 1st through the 10th so you'd better hurry.  It looks like we will have 18 lucky users this year and I want to thank everyone that stepped up and donated.  I would also like to send a huge "THANK YOU" out to Brad for keeping the lights on and making this great community possible for all of us.  All Prizes given are to be arranged with the user sponsoring that gift after the names have been drawn on Dec 11.


The list of items are as follows



Donated By: IronMan

2 E3D Lites (12 or 24V):
http://www.filastruder.com/products/lite6

And 1 full (1KG) spool of MakerGeeks ABS Filament; color of winner's choice:
http://www.makergeeks.com/abs3dfibymaf.html

Shipping included to all US locations!

Donated By: Azerate

*Lawsy's carriages
*E3D Hobb Goblin with tension arm and radial bearing
*1kg of Inland filament- ABS or PLA as well as color will be winner's choice

Free US shipping, international respectfully pays their way smile

Donated By: knowack

An X-acto knife set and a digital caliper to be given away separately.

Donated By: heartless

A set of Lawsy Carriages in the winner's color of choice - I have about 15 colors to choose from smile

Donated By: Revolve3D

a 1Kg spool of 1.75mm ABS or 1.75mm PLA in one of the colors we offer. Winner picks material and color. Domestic shipping will be included. http://www.revolve3d.com/

Happy Holidays!

Donated By: Jagowilson

A Lite6, lightly used. I received it for free to test out before it went public, and I no longer use it, so I'd love to pass it on.

Donated By: elmoret

Offering 3 store credits for www.filastruder.com:

$150
$100
$50

Merry Christmas!

Donated By: wardjr

Three rolls of Taulman PCTPE one roll each to three people, Domestic shipping included.


Donated By: Brad

$50 towards anything printer related that the winner wants that can be ordered online!!!
arrange details with wardjr.

Good luck everyone and Merry Christmas!


Good luck and Merry Christmas!

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

11

Re: 2015 Christmas Giveaway!!!!

I'd like to enter please

Sd4 #9080 with a glass bed. E3d chimera duel extruder. Paste extruder , duet wifi.
Lawsy carriages. linear bearings. Y axis direct drive, Kinect scanner
SD4#8188 glass bed, lawsly carriages, E3d v6, octoprint http://www.ustream.tv/channel/hotrod96z28
Filastruder/filawinder, Custom Delta 300mm x 600mm

12

Re: 2015 Christmas Giveaway!!!!

I'd love to enter.

FuseBox 1.5 CoreXY - e3dv6 - Graphic Smart Display
Solidoodle 2 - e3dv6 - Hobb Goblin - e3d Titan - lawsy carriages - Direct Drive Y Axis - T8 Z axis - OctoPi

13

Re: 2015 Christmas Giveaway!!!!

Please enter me.

Thank you to everyone who makes this site work, and to all who donated.

Solidoodle 4-Mostly stock running off headless Raspberry Pi with Octoprint

14

Re: 2015 Christmas Giveaway!!!!

Enter my name please. 

Merry Christmas to all....

Ski

Ender 3 Pro

15

Re: 2015 Christmas Giveaway!!!!

Can I be entered please.
Thank You and Merry Christmas

16

Re: 2015 Christmas Giveaway!!!!

put me in for either one of the credits towards an E3D hotend from Elmoret/Brad or if their all gone then any roll of ABS filament. thanks!

Solidoodle 2 with Deluxe kit cover & glass bed with heater. and 2nd board SD2 used not 3rd and alum platform not installed yet still wood. also need cooling fan installed to board. use Repetier Host couple vers. Slic3r also have all free ware STL programs

17

Re: 2015 Christmas Giveaway!!!!

n2ri wrote:

put me in for either one of the credits towards an E3D hotend from Elmoret/Brad or if their all gone then any roll of ABS filament. thanks!

I won't be separating out what and for whom I am drawing for.  Every name goes in a hat and I will pull the names out as I go right down the list of prizes.  If you don't need what you win, feel free to re-gift it.

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

18

Re: 2015 Christmas Giveaway!!!!

Enter my name please.
Thank you to all who have donated
Thank you to all the staff here for a great forum
And merry Christmas to all
Tin

Soliddoodle 4 stock w glass bed------Folger Tech Prusa 2020 upgraded to and titan /aero extruder mirror bed
FT5 with titan/ E3D Aero------MP mini select w glass bed
MP Utimate maker pro-W bondtech extruder
Marlin/Repetier Host/ Slic3r and Cura

19

Re: 2015 Christmas Giveaway!!!!

Sign me up please smile

Solidoodle Workbench Apprentice
M5 replacement z-axis rod, PEI bed

20

Re: 2015 Christmas Giveaway!!!!

Please enter me in the giveaway!
Thanks.

(And thanks for the forum!)

21

Re: 2015 Christmas Giveaway!!!!

Enter me, please!

22

Re: 2015 Christmas Giveaway!!!!

I would like to enter!

Solidoodle 3, Bulldog XL Direct Drive, Well Nut for Z axis, borosilicate glass, E3D V6 Hot end, Custom Encloser, Lawsy Carriages with Linear Bearings and Polished 8mm Chrome rods.

23

Re: 2015 Christmas Giveaway!!!!

I would also like to enter.
This forum is amazing and has been such a help.

24

Re: 2015 Christmas Giveaway!!!!

Count me in. Thank you !

Fat kids are harder to kidnap!

25

Re: 2015 Christmas Giveaway!!!!

it would be nice to be entered,
but im pretty sure I havnt put in 10 contributing posts.