1 Topic by ggunners (edited by ggunners 2014-10-08 20:04:38)

  • ggunners
  • ggunners
  • Member
  • Offline
  • From: Chantilly, VA USA
  • Registered: 2013-12-03
  • Posts: 170

Topic: printed a "Google Cardboard" viewer with DaVinci

Fooling around with a Google Cardboard VR viewer that you can purchase on Amazon for $9 but found the cardboard is a bit flimsy and gets dirty pretty fast. Search and found a Google Cardboard for Samsung S5 on Thingiverse that works very well. The 3D print on the Da Vinci 1.0 had all holes too small and needed some work to make them fit. The worst hole was where the lenses are supposed to sit. Otherwise, it works as advertised. -- ggunners

http://www.soliforum.com/misc.php?action=pun_attachment&item=6427

Post's attachments

20141008_123144.jpg 1008.93 kb, file has never been downloaded. 

You don't have the permssions to download the attachments of this post.
SD2 Expert stock, ABS fume fan,
XYZ DaVinci 1.0 stock ABS, Simplify3D
QUBD Two-Up PLA, new 3D printed X gantry, Y idler, flex z coupler, extruder mount, E3D Lite

2 Reply by desertstriker2008

  • desertstriker2008
  • Member
  • Offline
  • Registered: 2014-09-19
  • Posts: 70

Re: printed a "Google Cardboard" viewer with DaVinci

Thinking this will be on a list of things i will print once i get my 3d printer from Solidoodle. Also where do you get the lenses from?

3 Reply by accusedmonk

  • accusedmonk
  • Member
  • Offline
  • Registered: 2013-10-22
  • Posts: 253

Re: printed a "Google Cardboard" viewer with DaVinci

That's on my to do list now, does it make you feel like you're in the movie?

Bowden SD3, Rumba, E3D hotend, Mk5 with RtRyder changes, Direct drive Y axis and bearings, GT2 pulleys and braided fishing line, Lawsy linear bearing conversion, M3 Z screw.

4 Reply by Rinstruct

  • Rinstruct
  • Rinstruct
  • Newbie
  • Offline
  • From: London
  • Registered: 2015-03-03
  • Posts: 5

Re: printed a "Google Cardboard" viewer with DaVinci

Great Stuff

Rinstruct's Website

5 Reply by TickTock

  • TickTock
  • TickTock
  • Member
  • Offline
  • Registered: 2014-05-28
  • Posts: 263

Re: printed a "Google Cardboard" viewer with DaVinci

Here is an alternative headset with some features you might like:

http://www.thingiverse.com/thing:733390

Also an alternative phone carrier for a note4 without a case here:

http://www.thingiverse.com/thing:736170