1

Topic: Soliwiki

Is Soliwiki down?  I keep getting Forbidden/403 error all day Saturday.
Is it me or something else?

Ski

SD2, E3D V6 & Lite6, Modified MK5 extruder, Lawsy's carriages, 360W P/S, aftermarket heated glass bed - SSR controlled (build table heats to 97C in 3 min), removable Plexiglas enclosure, ball bearings, 6 cooling fans.

2 (edited by satman49 2015-01-01 22:14:30)

Re: Soliwiki

Same here. 403,forbidden

SD3, E3D hotend,linear bearing on x/y axis',pillow block bearing on y conneting rod, ball bearngs on front y axis, fan on y stepper motor.

3 (edited by OneMoreCast 2015-01-03 08:05:26)

Re: Soliwiki

Just made same post. Yup forbidden error for me as well

"All your base are belong to us." SD4 with a RUMBA, supernight PS, 40mm fan on X motor, lawsey carriages with new better tolerance rods, flanged rear bearings, new NEMA 17 with leadscrew on Z-Axis, and e3d v6 with MK5.


Ward and Jago are my heroes tongue

4

Re: Soliwiki

http://wiki.solidoodle.com found this to work. Button at top just happens not to

"All your base are belong to us." SD4 with a RUMBA, supernight PS, 40mm fan on X motor, lawsey carriages with new better tolerance rods, flanged rear bearings, new NEMA 17 with leadscrew on Z-Axis, and e3d v6 with MK5.


Ward and Jago are my heroes tongue

5 (edited by redbarret 2015-01-04 09:16:27)

Re: Soliwiki

That's the "official" Solidoodle manual which is relatively new and right now is an open wiki. Most of the text I've already seen from other places.
We're talking about Soliwiki.com, a community made wiki which has existed before wiki.solidoodle.com was made. There's a lot of more info there which isn't present in wiki.solidoodle.com, even though some of the info is really outdated.

Yeah, there are two wikis... Kind of confusing. Independent Soliwiki should stay I think.

Solidoodle 4

6

Re: Soliwiki

Ahhhh okay...nvm my naiveness. Yea, community wiki still no bueno

"All your base are belong to us." SD4 with a RUMBA, supernight PS, 40mm fan on X motor, lawsey carriages with new better tolerance rods, flanged rear bearings, new NEMA 17 with leadscrew on Z-Axis, and e3d v6 with MK5.


Ward and Jago are my heroes tongue

7

Re: Soliwiki

The wiki was down while I fixed some spam issues with it. Its back up now, in a read only state until I add some extra spam protection.

8

Re: Soliwiki

Thanx!!

SD2, E3D V6 & Lite6, Modified MK5 extruder, Lawsy's carriages, 360W P/S, aftermarket heated glass bed - SSR controlled (build table heats to 97C in 3 min), removable Plexiglas enclosure, ball bearings, 6 cooling fans.

9

Re: Soliwiki

I'm now getting 403 Forbidden errors again sad
Working on the wiki again?

10

Re: Soliwiki

Yeah, more memory issues from spammers. Back up now.