1

Topic: Mandatory signature

With the influx of XYZ users and whatnot on Soliforum, I have seen a few users post help responses unaware it is for a printer they don't know much about. With that in mind, many users, including myself, post what printer they use. This can help new users, and even veterans who aren't aware they can be giving poor advice.

Something like:
Printer used:
*Solidoodle
*Makerbot
*XYZ
*Home Built
*I don't own one

It is possible that if this were in place as mandatory, it could cut down on some spam and call out spammers themselves.
Just a thought.

Printit Mason and Printit Horizon printers
Multiple SD2s- Bulldog XL, E3D v5/v6/Lite6, Volcano, Hobb Goblin, Titan, .9 motor, Lawsy carriages, direct Y drive, fishing line...the list goes on
Filawinder and Filastruder #1870.....worth every penny!

2

Re: Mandatory signature

I can see where this would help when answering questions. Difficult to help with aproblem if one does not know what machine  is needing adjustment.


Tin

Soliddoodle 4 stock w glass bed------Folger Tech Prusa 2020 upgraded to and titan /aero extruder mirror bed
FT5 with titan/ E3D Aero------MP mini select w glass bed
MP Utimate maker pro-W bondtech extruder
Marlin/Repetier Host/ Slic3r and Cura

3

Re: Mandatory signature

I think it would help cut down on spam as well

SD2 - Glass Bed, Fans on PCB and Y motor, Custom enclosure
Slicer - Simplify3D

4

Re: Mandatory signature

+1

Ultimaker S3.

5

Re: Mandatory signature

Took your advice. smile

SD3. Mk2b + glass, heated enclosure, GT2 belts, direct drive y shaft, linear bearings, bowden-feed E3D v5 w/ 0.9° stepper
Smoothieboard via Octoprint on RPi

6

Re: Mandatory signature

done. great idea

Solidoodle 2 with Deluxe kit cover & glass bed with heater. and 2nd board SD2 used not 3rd and alum platform not installed yet still wood. also need cooling fan installed to board. use Repetier Host couple vers. Slic3r also have all free ware STL programs

7

Re: Mandatory signature

also even if they dont own a printer they can put what they do 3D wise e.g. design, make, sell printers, materials, software etc

Solidoodle 2 with Deluxe kit cover & glass bed with heater. and 2nd board SD2 used not 3rd and alum platform not installed yet still wood. also need cooling fan installed to board. use Repetier Host couple vers. Slic3r also have all free ware STL programs

8

Re: Mandatory signature

This should be done. I support.

Ulitmaker 2, a few repraps, Custom Big FFF 3D printer with heated chamber.

My Blog http://ggalisky.weebly.com/
My Youtube https://www.youtube.com/channel/UCXShYo … aDUpebDAOw

9

Re: Mandatory signature

I don't support the idea of it being mandatory, but still is a really good idea.

Tammy
Solidoodle 2
E3Dv6 Hotend, MK5 v6 version, Glass Bed, Anti Z backlash slop nut, SureStepr SD8825 1/32 Extruder Driver, makeshift breakaway plexiglass case; . L-Cheapo 3.8 Watt Laser Attachment w/Custom built enclosure
From Buffalo, NY, USA

10

Re: Mandatory signature

LdyMox wrote:

I don't support the idea of it being mandatory, but still is a really good idea.


this

SD2 with E3D, SD Press, Form 1+
Filastruder
NYLON (taulman): http://www.soliforum.com/topic/466/nylon/

11

Re: Mandatory signature

DePartedPrinter wrote:
LdyMox wrote:

I don't support the idea of it being mandatory, but still is a really good idea.


this

Yes

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

12

Re: Mandatory signature

wardjr wrote:
DePartedPrinter wrote:
LdyMox wrote:

I don't support the idea of it being mandatory, but still is a really good idea.


this

Yes

+1 - why I say "I took your advice" rather than "Yes, Sir!" tongue

SD3. Mk2b + glass, heated enclosure, GT2 belts, direct drive y shaft, linear bearings, bowden-feed E3D v5 w/ 0.9° stepper
Smoothieboard via Octoprint on RPi

13

Re: Mandatory signature

LdyMox wrote:

I don't support the idea of it being mandatory, but still is a really good idea.

+4.

Adding mine now.   wink

Two SD3s - One with Sang, One with Printrboard, Fans on control boards!!! Do this!!!, Dual Glass Beds, Blacklight "EZ Bake Oven" - Improves Ambient Temp, Sketchup, Repetier, Slic3r. Graphic Designer & Makeshift Engineer. Drinks Lots and Lots and Lots of Rum.

14

Re: Mandatory signature

LdyMox wrote:

I don't support the idea of it being mandatory, but still is a really good idea.

"Mandatory" is a little harsher than I meant in hindsight. wink

Printit Mason and Printit Horizon printers
Multiple SD2s- Bulldog XL, E3D v5/v6/Lite6, Volcano, Hobb Goblin, Titan, .9 motor, Lawsy carriages, direct Y drive, fishing line...the list goes on
Filawinder and Filastruder #1870.....worth every penny!

15

Re: Mandatory signature

well just say for best response to questions have that info there

Solidoodle 2 with Deluxe kit cover & glass bed with heater. and 2nd board SD2 used not 3rd and alum platform not installed yet still wood. also need cooling fan installed to board. use Repetier Host couple vers. Slic3r also have all free ware STL programs

16

Re: Mandatory signature

Yes great idea!

17

Re: Mandatory signature

Cool idea will give this go!