176

Re: Davinci Jr and Mini Regional Tag Swap

Hi everyone, I still have two nfc to change, one is from Coolarts and the other from the last yellow roll bought original.

Hola a todos, sigo teniendo dos nfc para cambiar, una de ellas es de Coolarts y la otra del ultimo rollo amarillo comprado original.

177

Re: Davinci Jr and Mini Regional Tag Swap

CHETOS, You have a PM

178 (edited by CoolArts 2017-02-25 20:31:41)

Re: Davinci Jr and Mini Regional Tag Swap

I'm willing to swap 1 or 2 TAGS with someone, i'm located in Europe. I don't care about distances.
Regards!

XYZ Junior/Mini Passwords Thread
If you are in a hurry and need your password NOW, or if it takes me too long for you, you can read the posts from 1851. I'm not going to be as effective as Bozo or Cgrillo, but you can give a try with me. If PASSWORDS thread follow it's current flow: asking for repeated passwords, not returning or false PACKS... I will end up with it as others before me.

179

Re: Davinci Jr and Mini Regional Tag Swap

I would like to share just bought my new tag...I Can have a passwordhttp://soliforum.com/i/?uJsyh0g.png

180 (edited by guimar.jr 2017-03-04 01:23:51)

Re: Davinci Jr and Mini Regional Tag Swap

Hi folks! I'm from Brazil and i'd like to swap some DaVinci Jr tags. If there is  someone in Brazil interested, please let me know.

181

Re: Davinci Jr and Mini Regional Tag Swap

I have a couple tags to swap in Baton Rouge, LA. I guess anywhere in the US is fine. I have passwords and will reset to 300m before I send. Would like to find someone who can do the same.

182

Re: Davinci Jr and Mini Regional Tag Swap

Hello, im Christian from Austria and i seek People for Tag Swap in Austria or Germany!

Thanks
Christian

183

Re: Davinci Jr and Mini Regional Tag Swap

yo tambien puedo intercambiar dos Ntag como dice Coolarts la distancia no es problema. se hacen amigos.

I can also exchange two Ntag as Coolarts says distance is no problem. they become friends.

184

Re: Davinci Jr and Mini Regional Tag Swap

I have 3 ntag to exchange in Spain

185

Re: Davinci Jr and Mini Regional Tag Swap

Hi.  I have 4 empty tags that I'd like to swap within the U.S.  I'm in CA.

186

Re: Davinci Jr and Mini Regional Tag Swap

Hi.  I have 4 empty tags that I'd like to swap within the U.S.  I'm in CA.

187

Re: Davinci Jr and Mini Regional Tag Swap

archiewong wrote:

Hi.  I have 4 empty tags that I'd like to swap within the U.S.  I'm in CA.



What type of printer do you have, what is the firmware version and how much does the tag show is still on it?

188

Re: Davinci Jr and Mini Regional Tag Swap

I have the Da Vinci Jr. on 2.2.7.  The tags are empty.

189

Re: Davinci Jr and Mini Regional Tag Swap

archiewong wrote:

I have the Da Vinci Jr. on 2.2.7.  The tags are empty.



Sorry for all of the questions, but I'm not sure if that version of the firmware locks the tag or not. What does the Tag Info display with one of the tags in the printer? I don't want to waste your money by asking you to send me a couple of tags for a swap then have them locked and not able to use them on my end.

190

Re: Davinci Jr and Mini Regional Tag Swap

My DVJr is on 2.2.7.  The tags say 0 available of 200.

191

Re: Davinci Jr and Mini Regional Tag Swap

Does the reading mean my tags are locked?

192

Re: Davinci Jr and Mini Regional Tag Swap

archiewong wrote:

Does the reading mean my tags are locked?

No, when they are unidentified - they are usually locked.
Showing 0m is good smile

193

Re: Davinci Jr and Mini Regional Tag Swap

If i understand this swapping.. ( apology as im not native english speaker )

I have empty tag ie. ( 0m left from 200m, not showing unidentified ) I can make deal here with someone and we swap tags. When swapped tag arrivesi can put it to third party PLA filament cartridge and i should be able to print again without buying XYZ overpriced PLA stuff smile

Please correct me if im wrong.

Thank you in advance

194

Re: Davinci Jr and Mini Regional Tag Swap

roope.jarvenpaa wrote:

If i understand this swapping.. ( apology as im not native english speaker )

I have empty tag ie. ( 0m left from 200m, not showing unidentified ) I can make deal here with someone and we swap tags. When swapped tag arrivesi can put it to third party PLA filament cartridge and i should be able to print again without buying XYZ overpriced PLA stuff smile

Please correct me if im wrong.

Thank you in advance

Yes, but you need to be able to reset/refill the card, either send it out reset or reset the card you receive (before it goes near your printer)

195

Re: Davinci Jr and Mini Regional Tag Swap

Thank you for answer, and how i reset my card or card i receiv?

196

Re: Davinci Jr and Mini Regional Tag Swap

roope.jarvenpaa wrote:

Thank you for answer, and how i reset my card or card i receiv?

You need to do some reading ....

197

Re: Davinci Jr and Mini Regional Tag Swap

I have one nfc tag that I just reset, for exchange.  Cont. U.S. only please.  If the tags work for us both when swapped, I have two others I can reset and exchange as well.  I'm in CA.  DV Jr.  2.2.7.

198

Re: Davinci Jr and Mini Regional Tag Swap

archiewong wrote:

I have one nfc tag that I just reset, for exchange.  Cont. U.S. only please.  If the tags work for us both when swapped, I have two others I can reset and exchange as well.  I'm in CA.  DV Jr.  2.2.7.

If you are in need of a tag. I will swap one with you. PM me and we can talk about details.

199

Re: Davinci Jr and Mini Regional Tag Swap

CoolArts wrote:

I'm willing to swap 1 or 2 TAGS with someone, i'm located in Europe. I don't care about distances.
Regards!

pedrodavidmartinperez wrote:

I have 3 ntag to exchange in Spain

chetosvsgeez wrote:

I have two other tags ready to exchange

Thanks Christoffer


I have one TAG ready to swap, 0,9 meters left from a da Vinci mini w. Distance does not matter since it is (almost) the same price to ship it in Sweden or to the world... I can reset the TAG to either 200 or 300 meters smile

Does anyone know if the newest version of XYZware allow modified TAGS at all? I have not updated it in fear of anything would stop working.

200

Re: Davinci Jr and Mini Regional Tag Swap

videtrombon wrote:
CoolArts wrote:

I'm willing to swap 1 or 2 TAGS with someone, i'm located in Europe. I don't care about distances.
Regards!

pedrodavidmartinperez wrote:

I have 3 ntag to exchange in Spain

chetosvsgeez wrote:

I have two other tags ready to exchange

Thanks Christoffer


I have one TAG ready to swap, 0,9 meters left from a da Vinci mini w. Distance does not matter since it is (almost) the same price to ship it in Sweden or to the world... I can reset the TAG to either 200 or 300 meters smile

Does anyone know if the newest version of XYZware allow modified TAGS at all? I have not updated it in fear of anything would stop working.

Do I actually know "Does anyone know if the newest version of XYZware allow modified TAGS at all?", no, but I seriously doubt if XYZ is ever going to do anything to help it's users. You can bet you will never be able to use hacked tags in your printer.