1

Topic: Config.h for Solidoodle Workbench

Good morning folks,

I did a quick search, and I cant find an answer on this.  The topic seemed like a good one. 

Can I use the config.h in Marlin that originally came on my Workbench on a ramps 1.4 conversion?  Would that save me any tuning time?  It's easy enough to test, but I'm wondering if anybody has any experience with it.

Thanks!

Of course I know what I'm doing.  I googled it.

2

Re: Config.h for Solidoodle Workbench

Of course you can but you'll need to assign a different board number for the ramps.  If using both extruders you'll have to sort some of that out.

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

3

Re: Config.h for Solidoodle Workbench

Thanks Wardjr!  Yeah, I figured all I needed was motherboard_type 33, and whack the second extruder. and abl stuff, because i excised it.

Of course I know what I'm doing.  I googled it.

4

Re: Config.h for Solidoodle Workbench

hoping that saves me a bunch of time...

Of course I know what I'm doing.  I googled it.