1 Topic by dubbsd

  • dubbsd
  • dubbsd
  • Member
  • Offline
  • From: Northwest florida
  • Registered: 2012-09-30
  • Posts: 748

Topic: Hope everyone had a happy new year mine started out bad

about 3;30 am we had an f2 tornado hit causing this.
http://soliforum.com/i/?T4fZEQP.jpg

Ultimaker S3.

2 Reply by Tin Falcon

  • Tin Falcon
  • Tin Falcon
  • Member
  • Offline
  • From: New Jersey, USA
  • Registered: 2014-08-01
  • Posts: 2,424

Re: Hope everyone had a happy new year mine started out bad

Hope all works out.

Soliddoodle 4 stock w glass bed------Folger Tech Prusa 2020 upgraded to and titan /aero extruder mirror bed
FT5 with titan/ E3D Aero------MP mini select w glass bed
MP Utimate maker pro-W bondtech extruder
Marlin/Repetier Host/ Slic3r and Cura

3 Reply by wardjr

  • wardjr
  • wardjr
  • Moderator
  • Offline
  • From: Minnesota
  • Registered: 2013-06-10
  • Posts: 5,623

Re: Hope everyone had a happy new year mine started out bad

That sucks, break out the chainsaw.

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

wardjr's Website

4 Reply by Ski52

  • Ski52
  • Ski52
  • Member
  • Offline
  • From: Florida USA
  • Registered: 2013-10-23
  • Posts: 332

Re: Hope everyone had a happy new year mine started out bad

Wow!  Hope you got 'Hurricane' coverage as opposed to 'Wind' coverage.  Fine line, but a tornado is not a hurricane....
Good Luck

Ender 3 Pro

5 Reply by dubbsd

  • dubbsd
  • dubbsd
  • Member
  • Offline
  • From: Northwest florida
  • Registered: 2012-09-30
  • Posts: 748

Re: Hope everyone had a happy new year mine started out bad

I broke the chainsaw working on  debris.
roof leaked and my printer got wet.

Ultimaker S3.

6 Reply by wardjr

  • wardjr
  • wardjr
  • Moderator
  • Offline
  • From: Minnesota
  • Registered: 2013-06-10
  • Posts: 5,623

Re: Hope everyone had a happy new year mine started out bad

If I were in your neighborhood I'd stop by and help with cleanup.  Anything would be better than shoveling snow again wink

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

wardjr's Website

7 Reply by dubbsd (edited by dubbsd 2017-01-02 20:44:11)

  • dubbsd
  • dubbsd
  • Member
  • Offline
  • From: Northwest florida
  • Registered: 2012-09-30
  • Posts: 748

Re: Hope everyone had a happy new year mine started out bad

wardjr
I have shoveled snow and it is no fun. grew up in Remer Minn.
been living in north west FL the last 45 years. I would rather shovel snow than go through another tornado or cat 4 hurricane.
and as i type this we are under another tornado warning.

Ultimaker S3.

8 Reply by wardjr

  • wardjr
  • wardjr
  • Moderator
  • Offline
  • From: Minnesota
  • Registered: 2013-06-10
  • Posts: 5,623

Re: Hope everyone had a happy new year mine started out bad

Remer is only 20 minutes away from me.  Home of Big Foot wink
If you ever come up for a visit, look me up!!!!

Crazy how small the world is.

Be safe!!!

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

wardjr's Website

9 Reply by Tin Falcon

  • Tin Falcon
  • Tin Falcon
  • Member
  • Offline
  • From: New Jersey, USA
  • Registered: 2014-08-01
  • Posts: 2,424

Re: Hope everyone had a happy new year mine started out bad

I live in joisey . The poorest county in the state  . High humility , Snow , hurricanes and occasional tornado . forest fires  about the only this we do not get much of is earthquakes  but even one of them once in a while.   
Stay safe

Soliddoodle 4 stock w glass bed------Folger Tech Prusa 2020 upgraded to and titan /aero extruder mirror bed
FT5 with titan/ E3D Aero------MP mini select w glass bed
MP Utimate maker pro-W bondtech extruder
Marlin/Repetier Host/ Slic3r and Cura

10 Reply by AZERATE

  • AZERATE
  • AZERATE
  • PRINTiT
  • Offline
  • From: Chicago
  • Registered: 2013-11-28
  • Posts: 2,077

Re: Hope everyone had a happy new year mine started out bad

I'm glad everyone is ok. Hope the new warning blows over.

I lived in Jacksonville for about 8 years (in Florida for 15 years on and off). In 2008 tropical storm Fay uprooted a tree on our property which fell on our house, piercing the roof and almost killed my wife and I. The insurance company screwed us, the house was abandoned, and we had to start all over after blowing through our life savings to fight homelessness. Days like that are one of many reasons I don't miss Florida, but it always could be worse.

Keep us in the loop so we know you are alright!

Printit Mason and Printit Horizon printers
Multiple SD2s- Bulldog XL, E3D v5/v6/Lite6, Volcano, Hobb Goblin, Titan, .9 motor, Lawsy carriages, direct Y drive, fishing line...the list goes on
Filawinder and Filastruder #1870.....worth every penny!