1

Topic: "jigsaw" arrived cracked..

Whats the best route to repair this while keeping my stock parts any not upgrading just yet.. (pic attached).

Everything else looks ok so far. Whats the best jigsaw replacement extruder that uses the stock hot end? Haven't upgraded any of my printers yet. If it works well, I will upgrade all of them.

Post's attachments

20161203_124202.jpg 1.38 mb, file has never been downloaded. 

You don't have the permssions to download the attachments of this post.

2

Re: "jigsaw" arrived cracked..

Lawsy's MK4 or 5 will work with a stock hot end.

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

3

Re: "jigsaw" arrived cracked..

I'll check them out. MK5 I take it is the newest?

4

Re: "jigsaw" arrived cracked..

Yep just slightly different in how they clamp around the hot end.  Functionally pretty much identical.

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

5

Re: "jigsaw" arrived cracked..

Will PLA work, or should I use ABS? Im doing a test run in PLA first I guess to make sure stuff matches up as it should.

6

Re: "jigsaw" arrived cracked..

Im also doing a line pattern fill @ .4 infill. What do you suggest the final settings to be?

7

Re: "jigsaw" arrived cracked..

Use ABS for sure and I prefer 100% infill, rectilinear pattern is fine.  .3 layer height with no less than 2 perimeters.

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

8

Re: "jigsaw" arrived cracked..

Thanks Ward. I printed them out of PLA to give it a test shot. I haven't calibrated this printer at all. Sure enough, a lot of the parts don't fit together, etc. I'll need to calibrate and re-print.

9

Re: "jigsaw" arrived cracked..

I've got an original unused jigsaw kicking around. If you want it its yours for the cost of shipping.

10

Re: "jigsaw" arrived cracked..

That would get me back rolling a  lot faster. I appreciate it. PayPal you the money, or put it on eBay ? However you want to do it.

11

Re: "jigsaw" arrived cracked..

Easiest thing for me if you don't mind is place an order here:

https://www.filastruder.com/products/other-parts

for 1x other parts, and check out. Makes it fast to print a shipping label and get it on the way to you.

12

Re: "jigsaw" arrived cracked..

Elmoret,
Thank you. Very much, I placed the order! Life saver.

13

Re: "jigsaw" arrived cracked..

No problem, shipped it today.