1

Topic: 2016 Christmas Giveaway

Another great year has passed and it is that time again!!!

For those of you interested in donating to the Christmas Giveaway this year.  I would request that you post that information here up until Dec 10th or send me a PM if you'd prefer.

To enter all you need to do is be a  contributing forum member with at least 10 (genuine) posts and ask to be entered here starting Dec. 11th through the 20th.  Yes, I will post up a reminder along with all of the details on Dec. 21st

Happy Holidays and as always Happy Printing from the SoliForum Staff

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

2

Re: 2016 Christmas Giveaway

I'll donate a digital caliper

Sd4 #9080 with a glass bed. E3d chimera duel extruder. Paste extruder , duet wifi.
Lawsy carriages. linear bearings. Y axis direct drive, Kinect scanner
SD4#8188 glass bed, lawsly carriages, E3d v6, octoprint http://www.ustream.tv/channel/hotrod96z28
Filastruder/filawinder, Custom Delta 300mm x 600mm

3 (edited by AZERATE 2016-11-30 19:55:33)

Re: 2016 Christmas Giveaway

I will donate the following:
*E3D Hobb Goblin
*.9 Nema 17 motor
*1kg of MG94 ABS filament made from my Filastruder. Color to be chosen by winner.

Free domestic US shipping, though I will honor international winners if we can reach an agreement.
Thanks again for a wonderful community!

Printit Mason and Printit Horizon printers
Multiple SD2s- Bulldog XL, E3D v5/v6/Lite6, Volcano, Hobb Goblin, Titan, .9 motor, Lawsy carriages, direct Y drive, fishing line...the list goes on
Filawinder and Filastruder #1870.....worth every penny!

4

Re: 2016 Christmas Giveaway

I'll donate too...an exacto knife set.

5

Re: 2016 Christmas Giveaway

Wardjr

I sent you a PM

Ultimaker S3.

6 (edited by Kronikabuse 2016-12-12 00:13:46)

Re: 2016 Christmas Giveaway

entering drawing.
ps: I want the filament from james lol

Sd4 #9080 with a glass bed. E3d chimera duel extruder. Paste extruder , duet wifi.
Lawsy carriages. linear bearings. Y axis direct drive, Kinect scanner
SD4#8188 glass bed, lawsly carriages, E3d v6, octoprint http://www.ustream.tv/channel/hotrod96z28
Filastruder/filawinder, Custom Delta 300mm x 600mm

7

Re: 2016 Christmas Giveaway

It is officially time to put your name in the hat for the Christmas Giveaway


To enter all you need to do is be a  contributing forum member with at least 10 (genuine) posts and ask to be entered here starting Dec. 21st through the 24th so you'd better hurry.  It looks like we will have 10 lucky users this year and I want to thank everyone that stepped up and donated.  I would also like to send a huge "THANK YOU" out to Brad for keeping the lights on and making this great community possible for all of us.  All Prizes given are to be arranged with the user sponsoring that gift after the names have been drawn on Dec 24th.


The list of items are as follows



Donated By: Dubbsd

2 sets to 2 separate recipients including a 6" digital caliper and  feeler gauge.
http://soliforum.com/i/?35co9sC.jpg
Domestic Shipping included


Donated By: Azerate
3 Items for 3 separate recipients
*E3D Hobb Goblin
*.9 Nema 17 motor
*1kg of MG94 ABS filament made from my Filastruder. Color to be chosen by winner.
Free domestic US shipping, though I will honor international winners if we can reach an agreement.
Thanks again for a wonderful community!


Donated By: knowack

An X-acto knife set.

Donated By:kronikabuse

I'll donate a digital caliper
Domestic Shipping included


Donated By: wardjr

Three rolls of Coex ABS or PLA filament:  one roll each to three people, Domestic shipping included.
https://coex3d.com/shop/?v=7516fd43adaa



Good luck and Merry Christmas!

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

8 (edited by Ski52 2016-12-21 21:51:30)

Re: 2016 Christmas Giveaway

Throw my name in the hat too.  I have really already been 'given' so much from the folks here in the last 3 years, I 'almost' feel bad looking for more.  This is the only forum I partake of for 3D printing.  I feel like I'm fully capable of operating a 3D printer, getting it to do what I want is another issue...

'Tis the season for giving.  Should my number come up, I'll gladly be on the receiving end.
Either way -
Ya'all have a safe & Merry Christmas!!

Ski & Family

Ender 3 Pro

9

Re: 2016 Christmas Giveaway

Tossing my hat in even though I don't post much.   I'm mostly a read-only member but I am building an Atlas Scanner so I may participate more once I get my screws sorted.  smile

MonoPrice Mini Select,  Orion Delta, HeartlessTech I3 2020, TWO Taz-5,  8 Wanhao Clones
Filistruder (Operational)  (Scanners RMA'd Due To Missing Components)
Benchtop Molding Press,  Arburg All-Arounder IMM,   Bridgeport ProTrac, Monarch 10EE Lathe,  Light Machine CNC Mill & Lathe
(THIS IS JUST MY HALF OF THE WORKSHOP MUAHAHAHAHA)

10

Re: 2016 Christmas Giveaway

Hey, i'll enter!

Ulitmaker 2, a few repraps, Custom Big FFF 3D printer with heated chamber.

My Blog http://ggalisky.weebly.com/
My Youtube https://www.youtube.com/channel/UCXShYo … aDUpebDAOw

11

Re: 2016 Christmas Giveaway

Add my name please
Tin

Soliddoodle 4 stock w glass bed------Folger Tech Prusa 2020 upgraded to and titan /aero extruder mirror bed
FT5 with titan/ E3D Aero------MP mini select w glass bed
MP Utimate maker pro-W bondtech extruder
Marlin/Repetier Host/ Slic3r and Cura

12

Re: 2016 Christmas Giveaway

So I realize I am a couple of days late.  Bad weather makes for slow travels and delays beyond my control.
I looks as though we only have 5 people that put their names in the drawing.  For those five this is good news, double gifts!!!!
I have literally put the names in a hat and drew them out till all five names were drawn as I went down the gift list as stated above.  Then they went back into the hat and were drawn a second time going through the list of gifts a second time.

I can not stress this enough, you must contact the donor of your particular gifts to accept and arrange shipping. 

THE WINNERS ARE!!!!   Alright I know, all five of you are winners but here is what you won wink

kronikabuse: MG94 donated by Azerate and a roll of Coex donated by wardjr

Ski52: An X-acto knife set donated by knowack and a digital caliper donated by kronikabuse

BurningRingOfFire: a 6" digital caliper and  feeler gauge donated by dubbsd and a roll of Coex donated by wardjr

Ggalisky: an E3D Hobb Goblin donated by AZERATE and a 6" digital caliper and  feeler gauge donated by dubbsd

Tin Falcon: a .9 Nema 17 motor donated by AZERATE and a roll of Coex donated by wardjr


There you have it, sorry for the delay and I hope you all had a very Merry Christmas!!!

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

13

Re: 2016 Christmas Giveaway

congrats to all the winners! smile

SD4 #1 & #2 - Lawsy carriages, E3D v6, Rumba controller board, mirror bed plate, X motor fan, upgraded PSU & Mica bed heater
SD4 #3 - in the works ~ Folgertech FT-5, rev 1
Printit Industries Beta Tester - Horizon H1

14

Re: 2016 Christmas Giveaway

PMs Sent thank you to all who donated and to wardJr for running this raffle.

Soliddoodle 4 stock w glass bed------Folger Tech Prusa 2020 upgraded to and titan /aero extruder mirror bed
FT5 with titan/ E3D Aero------MP mini select w glass bed
MP Utimate maker pro-W bondtech extruder
Marlin/Repetier Host/ Slic3r and Cura

15

Re: 2016 Christmas Giveaway

Thank you.

MonoPrice Mini Select,  Orion Delta, HeartlessTech I3 2020, TWO Taz-5,  8 Wanhao Clones
Filistruder (Operational)  (Scanners RMA'd Due To Missing Components)
Benchtop Molding Press,  Arburg All-Arounder IMM,   Bridgeport ProTrac, Monarch 10EE Lathe,  Light Machine CNC Mill & Lathe
(THIS IS JUST MY HALF OF THE WORKSHOP MUAHAHAHAHA)

16

Re: 2016 Christmas Giveaway

Congratulations winners!   It's things like this that promote our sense of community here at Soliforum!  Thanks to all the donors.

17

Re: 2016 Christmas Giveaway

A big thank you to wardjr for running the giveaway this year, and an equally big thank you to all of our forum members for making this a great community.

Printit Mason and Printit Horizon printers
Multiple SD2s- Bulldog XL, E3D v5/v6/Lite6, Volcano, Hobb Goblin, Titan, .9 motor, Lawsy carriages, direct Y drive, fishing line...the list goes on
Filawinder and Filastruder #1870.....worth every penny!

18

Re: 2016 Christmas Giveaway

Tell you what,  I am currently talking to CoEx about donating to my test and review group on Facebook  3D Printer Cult Extreme.

I'm more than happy to receive the caliper and gauge...   Why don't you pick someone at random and send the material to them as New Years Surprise.

MonoPrice Mini Select,  Orion Delta, HeartlessTech I3 2020, TWO Taz-5,  8 Wanhao Clones
Filistruder (Operational)  (Scanners RMA'd Due To Missing Components)
Benchtop Molding Press,  Arburg All-Arounder IMM,   Bridgeport ProTrac, Monarch 10EE Lathe,  Light Machine CNC Mill & Lathe
(THIS IS JUST MY HALF OF THE WORKSHOP MUAHAHAHAHA)

19

Re: 2016 Christmas Giveaway

BurningRingOfFire wrote:

Tell you what,  I am currently talking to CoEx about donating to my test and review group on Facebook  3D Printer Cult Extreme.

I'm more than happy to receive the caliper and gauge...   Why don't you pick someone at random and send the material to them as New Years Surprise.

Will do

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

20

Re: 2016 Christmas Giveaway

BurningRingOfFire wrote:

Tell you what,  I am currently talking to CoEx about donating to my test and review group on Facebook  3D Printer Cult Extreme.

I'm more than happy to receive the caliper and gauge...   Why don't you pick someone at random and send the material to them as New Years Surprise.


Awesome,  thanks.   I love getting new and interesting filaments to play with,  that's why I started the Printer Cult.    However there is such a thing as too much of a good thing even with 12 printers running.  big_smile

This way I get my samples from CoEx and someone else gets to play with new material as well!

MonoPrice Mini Select,  Orion Delta, HeartlessTech I3 2020, TWO Taz-5,  8 Wanhao Clones
Filistruder (Operational)  (Scanners RMA'd Due To Missing Components)
Benchtop Molding Press,  Arburg All-Arounder IMM,   Bridgeport ProTrac, Monarch 10EE Lathe,  Light Machine CNC Mill & Lathe
(THIS IS JUST MY HALF OF THE WORKSHOP MUAHAHAHAHA)

21 (edited by n2ri 2017-12-05 20:33:16)

Re: 2016 Christmas Giveaway

was last year the last Christmas Give away for the forum? sorry I missed it. been dealing with lots of RL and computer issues. still check in now and then but my 3D printing has been dormant over a year now. will get back at it soon as things get worked out. Merry Christmas to All & Happy New Year! God bless you & yours.

Mitch/N2RI

Solidoodle 2 with Deluxe kit cover & glass bed with heater. and 2nd board SD2 used not 3rd and alum platform not installed yet still wood. also need cooling fan installed to board. use Repetier Host couple vers. Slic3r also have all free ware STL programs

22

Re: 2016 Christmas Giveaway

I'll donate some items for this year's giveaway.  This forum has been good to me!