1 Topic by Bojofart

  • Bojofart
  • Newbie
  • Offline
  • Registered: 2016-09-02
  • Posts: 4

Topic: xyz davinci 1.0 error 0040 without using sd card

I keep getting error 0040 about 20 minutes into my print. This doesn't make sense because I have it hooked up directly with a usb cable. How can I fix this or get more than 20 minutes out of a print on this printer? The website doesn't say anything either. Any help would be appreciated.

2 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: xyz davinci 1.0 error 0040 without using sd card

If you are using a stock board then you must have the SDcard in the board and plugged in securely. It must also have all of the original files intact on it. The machine uses this card as a temporary hard drive and there are files on it that it needs to run. Even though you use a USB cable it still puts the file on the card and runs from the card.  The cable only allows you to monitor status.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

3 Reply by Bojofart

  • Bojofart
  • Newbie
  • Offline
  • Registered: 2016-09-02
  • Posts: 4

Re: xyz davinci 1.0 error 0040 without using sd card

Hello and thank you for the response. That was exactly it. I just took out and reinserted the sd card and it worked like a charm.

4 Reply by nguyengourdou

  • nguyengourdou
  • Newbie
  • Offline
  • Registered: 2018-02-25
  • Posts: 1

Re: xyz davinci 1.0 error 0040 without using sd card

Hi All,
I got the same problem with error code for my pro 1.
How can I open and reinstall SD card?
Please. help.
Thanks

5 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: xyz davinci 1.0 error 0040 without using sd card

nguyengourdou wrote:

Hi All,
I got the same problem with error code for my pro 1.
How can I open and reinstall SD card?
Please. help.
Thanks

Open the back panel, remove the card and reseat it..

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

6 Reply by Grendel

  • Grendel
  • Grendel
  • Member
  • Offline
  • From: Canterbury, Kent, UK
  • Registered: 2017-03-03
  • Posts: 108

Re: xyz davinci 1.0 error 0040 without using sd card

on mine I had that error and had to replace the SD card with a new one.

7 Reply by carl_m1968 (edited by carl_m1968 2018-02-26 15:07:34)

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: xyz davinci 1.0 error 0040 without using sd card

Grendel wrote:

on mine I had that error and had to replace the SD card with a new one.


I had to do the same, if your lucky the card is not too bad to recover the files from. As there are some files that you have to have on the card. In fact one thing I would advise all XYZ owners to do is to remove the card from day one and make a copy of it. That way when the cheap card they use fails you will have a copy to put on a new card.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

8 Reply by yizhou.he

  • yizhou.he
  • yizhou.he
  • Member
  • Offline
  • From: Boston, MA
  • Registered: 2017-07-05
  • Posts: 1,322

Re: xyz davinci 1.0 error 0040 without using sd card

Are those file machine specific or someone can upload a copy to share with others?

(Da Vinci 1.0, Jr. 1.0 RAMPS, miniMaker) X4, (Creality CR-10S, CR-10 mini, Ender-3) X4, Anycubic MEGA X4, Anycubic Chrion X1, ADMILAB Gantry X2 (MonoPrice Maker Select V2, Plus, Ultimate)X4--Select mini X1, Anycubic photon X4, Wanhao duplicate D7 X1.
iNSTONE Inventor Pro X2, CTC Dual X2, ANET-A8, Hictop 3DP-11, Solidoodle Press, FLSUN I3 2017X1

9 Reply by Bozotclown1970

  • Bozotclown1970
  • Bozotclown1970
  • Member
  • Offline
  • From: USA
  • Registered: 2016-01-05
  • Posts: 1,516

Re: xyz davinci 1.0 error 0040 without using sd card

Backups, Backups, Backups!

10 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: xyz davinci 1.0 error 0040 without using sd card

yizhou.he wrote:

Are those file machine specific or someone can upload a copy to share with others?

Since they contain configuration data they would be machine specific.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

11 Reply by yizhou.he

  • yizhou.he
  • yizhou.he
  • Member
  • Offline
  • From: Boston, MA
  • Registered: 2017-07-05
  • Posts: 1,322

Re: xyz davinci 1.0 error 0040 without using sd card

carl_m1968 wrote:
yizhou.he wrote:

Are those file machine specific or someone can upload a copy to share with others?

Since they contain configuration data they would be machine specific.

So if one use shared copy from another machine of the same model, all he need to do is some calibration, correct?

(Da Vinci 1.0, Jr. 1.0 RAMPS, miniMaker) X4, (Creality CR-10S, CR-10 mini, Ender-3) X4, Anycubic MEGA X4, Anycubic Chrion X1, ADMILAB Gantry X2 (MonoPrice Maker Select V2, Plus, Ultimate)X4--Select mini X1, Anycubic photon X4, Wanhao duplicate D7 X1.
iNSTONE Inventor Pro X2, CTC Dual X2, ANET-A8, Hictop 3DP-11, Solidoodle Press, FLSUN I3 2017X1

12 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: xyz davinci 1.0 error 0040 without using sd card

As long as the machines are the same model than one SD card from one should work in another.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.