1 Topic by Edwin

  • Edwin
  • Edwin
  • Member
  • Offline
  • From: Germany
  • Registered: 2016-09-02
  • Posts: 42

Topic: Printing with a 0.2mm airbrush nozzle

Hi,

currently I am a little thing to do when trying out with a 0.2mm airbrush nozzle that.
The here are the prints that I made today.

http://up.picr.de/26715081kr.jpg

http://up.picr.de/26715083sg.jpg

http://up.picr.de/26715085rh.jpg

http://up.picr.de/26715087ta.jpg

The geco is printed with PLA and a layer height of 0.1 mm, the small just 5 minutes and the large after 45 minutes was finished.

But I have so even large characters printed as this dragon with 378mm height.

http://up.picr.de/26414252lf.jpg

The course I also printed in small.

http://up.picr.de/26420297ky.jpg

greetings Edwin

2 Reply by Edwin

  • Edwin
  • Edwin
  • Member
  • Offline
  • From: Germany
  • Registered: 2016-09-02
  • Posts: 42

Re: Printing with a 0.2mm airbrush nozzle

Now the geckos do not have a big brother...:)

http://up.picr.de/26731156xq.jpg