1 Topic by reemaj3D

  • reemaj3D
  • Member
  • Offline
  • Registered: 2015-12-24
  • Posts: 15

Topic: Challenging Models to fix for 3D Printing

Hey Guys,

This is Reem from MakePrintable Team. We are looking for designers who have 3D models that are difficult to fix for 3D printing. In order, to test out our mesh repair tool. If you are using thingiverse, we an app that you can access in the tools & utilities section.



Thanks,

2 Reply by n2ri

  • n2ri
  • Member
  • Offline
  • From: St Louis MO USA area
  • Registered: 2013-02-03
  • Posts: 2,539

Re: Challenging Models to fix for 3D Printing

I found nothing like this at Thingiverse

Solidoodle 2 with Deluxe kit cover & glass bed with heater. and 2nd board SD2 used not 3rd and alum platform not installed yet still wood. also need cooling fan installed to board. use Repetier Host couple vers. Slic3r also have all free ware STL programs

3 Reply by n2ri

  • n2ri
  • Member
  • Offline
  • From: St Louis MO USA area
  • Registered: 2013-02-03
  • Posts: 2,539

Re: Challenging Models to fix for 3D Printing

ok, found it but it looks like it works nice until you try to download fixed file then it turns the Thingiverse stl file into a lessor quality obj file and when converted back to stl is actualy worse than b4 repairs. and this was with a mild error filled file. a bad errored file would likely be destroyed. at least repair file back to original format as if you select 'remix' thingiverse cant even see an obj file or anything but stl

Solidoodle 2 with Deluxe kit cover & glass bed with heater. and 2nd board SD2 used not 3rd and alum platform not installed yet still wood. also need cooling fan installed to board. use Repetier Host couple vers. Slic3r also have all free ware STL programs

4 Reply by n2ri

  • n2ri
  • Member
  • Offline
  • From: St Louis MO USA area
  • Registered: 2013-02-03
  • Posts: 2,539

Re: Challenging Models to fix for 3D Printing

looks like Kiss slicer app the way it does repair view but it dont do as nice of job as it shows. after converting back to stl and looking at it in Netfab its all sliced and added walls where repairs made plus other errors not from original plus file size is much bigger. back to drawing board

Solidoodle 2 with Deluxe kit cover & glass bed with heater. and 2nd board SD2 used not 3rd and alum platform not installed yet still wood. also need cooling fan installed to board. use Repetier Host couple vers. Slic3r also have all free ware STL programs