Topic: PLA troubles - strange
I am running a SD3 with E3D v6. I bought some Night Glow PLA from Maker Filament.
I've been running ABS for a while and I'm just starting to run PLA with my e3d. note, I completely disassembled and cleaned the nozzle prior to running PLA
195 on the nozzle
70 on the glass bed with aquanet.
After about an hour, the stepper starts grinding filament. I kill the print, hold the temp and try to push a bit while manually advancing the extruder stepper - no joy
BUT if I retract 10 mm and then go forward again, the material runs smooth and easy.
ideas?
Joe
still a rookie newbie, but learning.
Dreaming on building a large format from scratch