1 (edited by Tin Falcon 2016-05-14 13:04:21)

Topic: PrintedSoid Open House

On May 15th, 2016 from 10-4   2850 Ogletown Rd, Newark, DE 19713

Anyone here planning on attending. I have a busy weekend but hope to stop by and support Matt.

https://printedsolid.com/blogs/news

Tin

Soliddoodle 4 stock w glass bed------Folger Tech Prusa 2020 upgraded to and titan /aero extruder mirror bed
FT5 with titan/ E3D Aero------MP mini select w glass bed
MP Utimate maker pro-W bondtech extruder
Marlin/Repetier Host/ Slic3r and Cura

2

Re: PrintedSoid Open House

too far away for me. sad

SD4 #1 & #2 - Lawsy carriages, E3D v6, Rumba controller board, mirror bed plate, X motor fan, upgraded PSU & Mica bed heater
SD4 #3 - in the works ~ Folgertech FT-5, rev 1
Printit Industries Beta Tester - Horizon H1

3

Re: PrintedSoid Open House

To far away for most of the world . Although I hear the 3D printing Nerd is flying in from Seattle. I would not expect such heroics from most folks.
Wondering if others from the South Jersey south East PA  Delaware Md area may be able to attend.

I would expect a few folk in such a densely populated area to have a printer . Although this is not the NYC market area either.


Tin

Soliddoodle 4 stock w glass bed------Folger Tech Prusa 2020 upgraded to and titan /aero extruder mirror bed
FT5 with titan/ E3D Aero------MP mini select w glass bed
MP Utimate maker pro-W bondtech extruder
Marlin/Repetier Host/ Slic3r and Cura

4

Re: PrintedSoid Open House

we have something like that going on here next week

The Power of Additive Manufacturing
Sponsored by KABA, Gateway Technical College
May 19, 2016 from 7:30 AM to 10:30 AM
Location: Innovation Works @ Snap-on
Cost: $25.00
Directions: 2801 80th Street Kenosha WI
    Email
In the world of manufacturing technology, certain innovations have the potential to transform the industry, enabling new and existing products to be made faster, cheaper and better. Additive manufacturing is transforming prototype design and part production now and in the future... but we are only at the start of this exciting journey. Also known as '3-D printing', additive manufacturing creates fabrications that wouldn't be possible with conventional processes.

Sd4 #9080 with a glass bed. E3d chimera duel extruder. Paste extruder , duet wifi.
Lawsy carriages. linear bearings. Y axis direct drive, Kinect scanner
SD4#8188 glass bed, lawsly carriages, E3d v6, octoprint http://www.ustream.tv/channel/hotrod96z28
Filastruder/filawinder, Custom Delta 300mm x 600mm

5

Re: PrintedSoid Open House

PrintedSolid  is primarily a Vendor of top quality filament . He also sells a few printers and will be offering training now that he has the space . He has been doing train the trainer programs in schools    He has been selling online for years now.  And the time has come to open a sheet metal store.

Tin

Soliddoodle 4 stock w glass bed------Folger Tech Prusa 2020 upgraded to and titan /aero extruder mirror bed
FT5 with titan/ E3D Aero------MP mini select w glass bed
MP Utimate maker pro-W bondtech extruder
Marlin/Repetier Host/ Slic3r and Cura

6

Re: PrintedSoid Open House

The event was a nice little makers fest.
Tin

Soliddoodle 4 stock w glass bed------Folger Tech Prusa 2020 upgraded to and titan /aero extruder mirror bed
FT5 with titan/ E3D Aero------MP mini select w glass bed
MP Utimate maker pro-W bondtech extruder
Marlin/Repetier Host/ Slic3r and Cura